How To Install A Pop
Aaron Stickley is a licensed plumber with 15 years of experience in commercial, new residential plumbing, and residential service and repair. He started his own residential service and repair plumbing business. Aaron’s articles about plumbing on The Spruce span four years.
The Spruce / Ana Cadena
- Working Time: 30 mins – 1 hr
- Total Time: 30 mins – 1 hr
- Skill Level: Beginner
- Estimated Cost: $20 to $50
For most bathroom sinks, the drain stopper apparatus is a pop-up assembly that works by means of a small vertical rod attached to a pivot rod below the sink. This lift rod slides up and down through a small hole in the back of the faucet body. The pivot rod moves a linkage inside the drain tailpiece, lifting or lowering the stopper as needed.
You’ll need to install a new drain stopper whenever you install a new sink. And sometimes when you are installing a new faucet, it may come with a stopper assembly that needs to be swapped out with the old stopper. Finally, if a sink drain begins to leak, you can buy a new stopper assembly to replace the old faulty one.
Installation of a drain stopper is usually fairly straightforward and simple, but occasionally the process can become a little more complicated due to variations in the fixture or fittings.
Polished Chrome Single Handle Bathroom Faucet With Pop
This polished chrome single handle bathroom faucet is a classic product weve catered to our clients since the establishment of our company. It has proven to be the most reliable and simplistic bathroom faucet we cary. It is exceptionally popular because it works well with multiple styles or themes. Single handle faucets tend to offer a cleaner area around your sink and less area to clean around. Simply lift the handle upwards to turn on the water and rotate left or right for hot and cold temperatures.
Our Single Handle Bathroom Faucets pair exceptionally well with most of our bathroom sinks and accessories offered in chrome, stainless steel, gray, black, beige, concrete, white, etc., and as well as many other brands similar finishes and complementary contrasts. This faucet has the potential to work with vessel sinks too as long as the sinks have their own faucet mounting deck. For example it works with the all undermount bathroom sinks but only a few vessel sinks like the V500 which has its own mounting deck for faucet.
Moen Brushed Nickel Spring Loaded Push Button Bathroom Drain Assembly
From finishes that are guaranteed to last a lifetime, to faucets that perfectly balance your water pressure, Moen sets the standard for exceptional beauty and reliable, innovative design. Bring elegance to your home with premium selections from Moen. From the sophistication of period Traditional to the streamlined refinement of minimalist contemporary, you’ll find a host of amazing ways to express your style with products from Moen.
Also Check: Why Is My Phones Battery Draining So Fast
How To Install A Bathroom Faucet With Pop Up Drain In 6 Easy Steps
Installing a pop-up drain is not easy. But its not impossible either. There are a lot of preparations and calculations that must be done first. Thats why youll have to follow certain steps strictly.
How to install a bathroom faucet with pop up drain?
Youll have to disconnect and remove the old drain first. When done, disassemble the faucet to take it out. Youll then have to install some washers on the threaded tubes. Place the faucet properly after connecting the tubes. Install the drain collar and connect the pop-up drain. You now have to adjust the clevis strap and check for leakage.
Anyhow, that was a short summary of the entire process. Its very complex and requires further elaboration. Thats why weve explained each of these steps in detail.
Read along if you wish to know more about the installation of pop-up drains.
Reassemble The Drain Trap
Finish the job by reconnecting the P-trap to the drain pipe and drain tailpiece. Check for leaks by closing the stopper, filling up the sink, then opening the stopper and letting the water drain out while you look for leaks from below. Connections that leak can be slightly tightened with channel-type pliers, but take care not to over-tighten them.
The Spruce / Kevin Norris
Don’t Miss: Replace Garbage Disposal With Regular Drain
First You Should Install A Pop
The waste pipe and drain of the bathroom sink are connected by the drain collar.
When metal comes into contact with water then a layer of rust is formed on the metal of the collar. In few years collar becomes rusted and becomes useless and starts clogging. So, its time to replace the pop-up drain assembly of the faucet.
First, you should place a plastic container or bucket under the sink all water comes into the bucket so after installing a bathroom faucet with a pop-up drain, you wont need to clean water on the floor and it will save your time.
Now drain the p trap. There may be a nut on the back of the p trap so use a channel lock plier to open it. Open all the nuts and remove the p trap.
Some pop-up drain doesnt have a p trap so you dont need to follow the above step. For this type of pop-up drain loosen the nut and pivot the trap out of the way. Bottom of the drain there would be a nut, you can use channel lock pliers to unscrew it.
In pop up drain there is a rubber gasket, remove it and pull out the drain. A pop-up drain is installed with plumber putty, so after removing the drain check that there is any excess plumbers putty or not into the sinkhole.
To install the new pop-up drain, first, you need to place the putty around the drain. To place putty, you need to roll it into snake form. For this process, a small amount of putty is needed. Now drain the collar down into the hole.
The next step is to put the washer on hand and tighten all nuts.
Put The Drain Stopper Into Place
Insert the pop-up stopper down into the drain opening inside the sink, making sure the hole in the linkage is facing toward the back of the sink. From under the sink, insert the pivot rod into the opening in the side of the tailpiece. Usually, there is a plastic washer on each side of the plastic ball. You should be able to feel the tip of the pivot rod slide through the opening in the stopper linkage inside the drain assembly.
Screw the pivot rod nut onto the threaded fitting on the side of the tailpiece, so the ball is secured inside the tailpiece. Test the action of the pivot rod to make sure the stopper goes up and down freely in the drain. If the pop-up is working properly, you can tighten the nut hand-tight. If the pop-up is not working, reposition the stopper and pivot rod so the pieces connect properly.
If the pop-up assembly is hard to move when you move the pivot rod, it’s likely that the pivot rod nut has been tightened down too much and needs to be slightly loosened.
The Spruce / Kevin Norris
You May Like: How To Clean Drain With Baking Soda
Delta Modern 1 Gpm Single Hole Bathroom Faucet With Pop
- Covered under Delta’s limited lifetime warranty
- Faucet body constructed of brass
- Brass is highly resistant to corrosion and an excellent choice to withstand high temperatures
- Coordinates with products from the Modern line
- Single hole mounting type
- Single lever handle controls the flow and temperature of water
- Faucet includes ceramic disc valve
- Pop-up drain included
- Spout Height: 4-3/8″
- Spout Reach: 4-1/2″
- Flow Rate: 1 gallons-per-minute
- Faucet Holes: 1
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We’ll also pay the return shipping costs if the return is a result of our error .
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper , the time it takes us to process your return once we receive it , and the time it takes your bank to process our refund request .
If you need to return an item, simply login to your account, view the order using the “Complete Orders” link under the My Account menu and click the Return Item button. We’ll notify you via e-mail of your refund once we’ve received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
Apply Pipe Joint Compound
Apply a thin layer of pipe joint compound to the top side of the rubber washer that will fit against the sink. Using joint compound on the rubber will ensure that it seals against the bottom of the sink drain opening. While pipe joint compound is not strictly necessary, without it you might have trouble getting the rubber to seal.
The Spruce / Kevin Norris
Recommended Reading: Clean Toilet Tank Without Draining
Top 10 Best Bathroom Faucet Without Pop Up Drain In 2022 Comparison Table
- Tall, domed design fits both flat and pop-up drains
- Effectively catches hair while allowing water to drain
- Weighted stainless steel accent holds Drain Protector in place
- Silicone edges lie flush on the tub surface so nothing slips underneath
- Resists rust for long-term use
- 2.25 Top diameter, 1″ Basket. Please carefully check dimension before you purchase – 2 Sink Drain Strainers with reclosable poly bag.
- Comes with metal flat rim to fit over sink’s drain. Great for Bathroom, Utility, Slop, Laundry, RV and Lavatory Sink. Strainers made of quality rust-resistant, durable and reliable stainless steel. Perfect for small sinks for daily usage for long lasting protection against drainage clogging.
- Basket Style design. Efficient anti-clogging strainer lets liquid flow into the drain while it blocks particles. Simple and small design. Allows to be cleaned easily without hassles.
How To Install A Bathroom Faucet With Pop Up Drain Assembly
Lets see a proper way to install a bathroom faucet with a pop up drain assembly. To begin the process, you need some tools.
- Faucet with pop-up drain
- A plastic container
When you do repair work in the kitchen or bathroom especially related to the faucet, there are chances that a lot of icky stuff you have to face so always wear a pair of disposable clothes. The disposable cloth will keep your body safe from any cut.
You May Like: Affordable Plumbing And Drain Cleaning
Installing A Faucet With Pop
There are a variety of problems regarding bathroom faucets. For example, bathroom faucets can become noisy or the handle might become loose.
But luckily, fixing most of these problems is very easy. Plus it takes only 5-10 minutes. This problem isnt an exception either.
These tools are required to begin the installation-
- Mechanical Pop-up drain
Manage these components as soon as you can and we can get started!
How To Install A Bathroom Faucet With Pop Up Drain
Upgrade bathroom faucets with a pop-up drain assembly would be a good decision because this upgradation will save water and also make washing easy. If you have purchased a new bathroom faucet and want to install it into bathroom sin but dont know how to install a bathroom faucet with pop up drain.
Bathroom faucets without pop-up drains are easy to install. Many people want to use a faucet with a pop-up drain in their bathroom sink but due to its tricky installation, they hesitate to buy this faucet.
Good thing is that in this article, all the steps of installing a bathroom faucet with a pop-up drain are explained in a simple way. So, now installation of a bathroom faucet is not a difficult task for you anymore.
Read Also: 50 Ft Drain Snake Home Depot
How To Clean A Pop Up Drain Of A Bathroom Faucet
Over time, the pop-up drain starts draining slowly because of debris in the drain. You need to clean the pop-up drain so it will work as a new one and water will flow fast. Pop up drain clogged due to hair and other things.
In the faucet, there is a little lever to control the movement of the drain. To close the drain, move the lever, and to open the drain move the lever down.
To clean the pop-up drain, you need to remove the stopper from it, and for this unscrew the nut of the drain. You can unscrew it with a bare hand without using any tool.
Now remove the rod from the drain. This rod controls the stopper motion of the drain.
Now the stopper will slide up out of the bathroom sink. In the drain, generally, the stopper is the main reason for the slow water. Hair and other debris are collected around the stopper so the flow of the water becomes slow. Clean debris and reinsert it into the drain.
Before reinserting the stopper, it would be great if you pour down hot water into the drain. Hot water cleans the drain and rinses away all things from the drain and makes it fully open for perfect water flow.
Pour hot water until you wont see the water flowing freely from the drain.
Now to reinsert the stopper, you need to remove the ball on the pin from the back of the sink. insert rod from underneath the sink and the faucet should face the back of the sink so the position of the hole and pin both match.
Connect The Drain Parts
Push the pop-up drain tailpiece assembly up through the drain opening from under the sink as high as you can. While holding the drain piece in place, fit the drain ring into the opening from above the sink, and thread the ring onto the drain tailpiece as far as you can by hand. . For now, it only needs to be hand-tightened to hold it in place.
The Spruce / Kevin Norris
You May Like: My Washer Is Full Of Water And Won’t Drain
Now Install The Bathroom Faucet
If you have any old faucets in the bathroom then first you need to remove them.
Before starting the process of removing the old faucet, turn off the water supply to the faucet from under the sink and if there is no option to turn off the water supply to the faucet then turn off the main water supply of the house.
Disconnect the water supply from the old faucet and remove it. Open all the screws and supply the connection of the faucet.
Now put a new faucet in the hole and attach the supply line to it. Tighten it properly with the help of the basin wrench. Turn on the water and test the faucet and pop-up drain are working properly or not.
There should be no leak from the faucet and drain pop-up, if there is a leakage then tighten that connection. Check how to fix leakage of shower faucet.
Our Recommendation For Bathroom Faucet With Pop Up Drain
Remove The Old Drain Assembly
Loosen and remove the P-trap from the branch drain and sink drain tailpiece, using channel-type pliers. With some traps, you may be able to loosen and remove the trap by hand, without a wrench. It’s possible there will be some water in the trap, so position a bucket under the trap to catch this water.
Next, extract the old pop-up linkage assembly, if there is one.
Now, use channel-type pliers to remove the mounting nut from the tailpiece on the old drain assembly. Lift the entire drain assembly clear of the sink. This may require some wiggling of the tailpiece to break the seal on the drain flange.
With the drain assembly removed, clean the sink thoroughly of debris and old plumber’s putty.
The Spruce / Kevin Norris
You May Like: How To Get Tub Drain Out
How To Select A Bathroom Faucet With Pop Up Drain
If you are shopping for a bathroom faucet with op up drain then there is a couple of things, you should know before purchasing.
First, check what is the opening size of the hole in the bottom of your bathroom sink and then select pop-up drain.
Second, if you have an overflow hole in the sink then you need to choose an overflow pop-up drain, so it would allow water to drain from the overflow hole of the sink.
Third, if your sink doesnt have any overflow hole then buy a pop-up drain without a hole in it.
In the pop-up, the drain rod goes into the faucet through a hole and it will open or close the stopper. For the non-overflow sink, a pop-up drain that comes with a spring load is a good option.
Spring load works when you push it. When you push the drain, pop up open and water flows through it.