Tuesday, December 5, 2023
HomeFactsFreestanding Tub Flexible Drain Hose Installation

Freestanding Tub Flexible Drain Hose Installation

How To Install A Freestanding Bathtub Using The Badeloft Ez

F2 Drain – The innovative solution for freestanding bathtub installation!

Before you begin installing your freestanding bathtub, its important to have the proper materials on hand. Read our step by step instructions to install your bathtub. Start by gathering the materials and supplies, making sure the floor is leveled, determining the placement, prepping and cleaning the floor, and more! Adding a freestanding bathtub to your bathroom is a luxurious way to make a statement, while also providing you with the type of retreat youve always dreamed of. Freestanding bathtubs are among the most distinctive choices you can make, and youll love the options available to you. Freestanding tubs can be modern, chic, and streamlined or more traditional looking. Going for a whimsical design or would you like something more sophisticated? The choice is yours. No matter which you prefer, your personality can come shining through.

If youre currently remodeling your bathroom or its under construction, adding a freestanding bathtub is a relatively easy process. You could hire a plumber for the entire job, but if you have basic home improvement skills, you might want to install the freestanding bathtub on your own. Keep in mind that you may need a plumber to move the drain to the appropriate location. Please note that the drain must always be installed according to your local plumbing codes. A licensed plumber can help.

Removing The Old Stopper

  • 1Turn a foot lock stopper counterclockwise to take it out of the drain. Foot lock stoppers are the simplest type of drain mechanism. All you need to do is rotate the stopper, or the part that moves up and down to open and close the drain. Pull up as you twist it counterclockwise until it lifts out of the drain flange.XResearch source
  • Make sure the stopper is in the open position. You wont be able to unscrew it if its closed.
  • The drain flange, or drain basket, is the body that connects the tub and stopper to the waste pipe.
  • 2Loosen the center screw if you have a lift-and-turn drain. Lift-and-turn drains and some foot lock drains may have a screw in the center of the stopper that holds it in place. If theres no visible screw, see if you can pop or twist off a cap on the stoppers top. Then, using a screwdriver, turn the screw counterclockwise and lift the stopper out of the drain flange.XResearch source
  • Some lift-and-turn drains simply twist out, so see if you can remove your stopper by turning it clockwise if you cant find any screws.
  • 3Remove the overflow plate and linkage if you have a lever-style drain. Start by removing the screws that secure the overflow faceplate. Take off the overflow plate, and pull the linkage rod and plunger out of the overflow hole. Then remove any screws that secure the drain plate, and lift it out of the drain flange.XResearch source
  • You may also need to pull out lower linkage when you remove the drain plate.
  • Prepare The Drain Tail Piece

    Your Badeloft freestanding bathtub comes with a pre-installed pop-up drain. Youll need to attach the drains tail piece to the bottom of the tub. First, place the plastic bushing on top of the tail piece and slide the nut up the tube. Screw it into the bathtub drain. Add lubricant to the rubber seal of the EZDrop in Drain.

    Recommended Reading: Bosch Dishwasher Is Not Draining

    Royal Flexible Bathtub Drain Pipe

    Royal Flexible Bathtub Drain Pipe

    Royal Prince 5-Foot Acrylic Skirted Bathtub RH-Drain **IN STOCK**

    WHAT SETS ROYAL ACRYLICS APART 5-Foot: 60 L x 30 W x 18 D The smooth, high-luster finish on Royal products resists:

    Royal Prince 5-Foot Acrylic Skirted Bathtub LH-Drain **IN STOCK**

    WHAT SETS ROYAL ACRYLICS APART 5-Foot: 60 L x 30 W x 18 D The smooth, high-luster finish on Royal products resists:<

    Royal King 5-Foot Acrylic Skirted Bathtub RH-Drain **IN STOCK**

    WHAT SETS ROYAL ACRYLICS APART 5-Foot: 60 L x 30 W x 16 D The smooth, high-luster finish on Royal products resists:

    Royal King 5-Foot Acrylic Skirted Bathtub LH-Drain **IN STOCK**

    WHAT SETS ROYAL ACRYLICS APART 5-Foot: 60 L x 30 W x 16 D The smooth, high-luster finish on Royal products resists:

    Royal Flex Drain Hose w/PancakeTrap for bathtub

    Flex Drain Hose w/PancakeTrap for tubDesigned for Royal Collection bathtubs but will fit any make and model of bathtub to allow use of existing drain underneath bathtub so floor drain does not have…

    Royal Flex Drain Hose w/PancakeTrap for bathtub

    Flex Drain Hose w/PancakeTrap for tubDesigned for Royal Collection bathtubs but will fit any make and model of bathtub to allow use of existing drain underneath bathtub so floor drain does not have…

    Royal Waste & Overflow Drain for Drop In & Alcove Tub- Chrome

    American Standard Cadet 66″ Acrylic Soaking Bathtub for Free Standing Tub with Center Drain – Tub Filler, Hand Shower and Drain Included

    Replacing The Drain Flange

    Universal Flex P trap for Freestanding Bathtub, Bathtub Drains
  • 1Unscrew the exposed drain flange with a drain key or pliers. After removing the stopper, youll see the exposed drain flange. The easiest way to remove it is to insert the head of a drain key into the flange and twist counterclockwise. You can find drain keys online and at home improvement stores.XResearch source
  • If you dont have a drain key, try sliding the handles of a pair of pliers down the flange past the X-shaped metal arms. Slide a strong screwdriver between the handles, and use it like a lever to turn the flange counterclockwise.
  • Tip: If you have trouble turning the flange, try heating it for 1 or 2 minutes with a hair dryer set to high. The heat will loosen the plumbers putty thats preventing you from turning the flange.

  • 2Scrape off old plumbers putty with a scrub pad or putty knife. Once youve lifted the flange out of the drain opening, scrape away any putty left behind. Take care not to damage the tub’s enamel and avoid using harsh, abrasive cleaning products.XResearch source
  • Remove and discard larger pieces of putty by hand, then rinse away smaller bits. If necessary, wipe away any stubborn residue with rubbing alcohol.
  • 3Spread a pencil-sized bead of putty around the rim of the new flange. Roll out a long, thin strand of plumber’s putty about the size and thickness of a pencil. Place it on the underside of the new flanges rim, then press it to cover the rim in an even layer.XResearch source
  • Also Check: Baking Soda To Clean Shower Drain

    Royal Flex Drain Hose W/pancaketrap For Bathtub

    Royal Flex Drain Hose w/PancakeTrap for bathtub

    Royal Flexible Bathtub Drain Pipe

    PVC Flex Plastic Waste Pipe for All Freestanding Tub Installation3.3 ft long drainage hose. Connect from the bottom of the tub drain to room ground drainage hole. 1-1/2 inch…

    Royal Prince 5-Foot Acrylic Skirted Bathtub RH-Drain **IN STOCK**

    WHAT SETS ROYAL ACRYLICS APART 5-Foot: 60 L x 30 W x 18 D The smooth, high-luster finish on Royal products resists:

    Royal Prince 5-Foot Acrylic Skirted Bathtub LH-Drain **IN STOCK**

    WHAT SETS ROYAL ACRYLICS APART 5-Foot: 60 L x 30 W x 18 D The smooth, high-luster finish on Royal products resists:<

    Royal King 5-Foot Acrylic Skirted Bathtub RH-Drain **IN STOCK**

    WHAT SETS ROYAL ACRYLICS APART 5-Foot: 60 L x 30 W x 16 D The smooth, high-luster finish on Royal products resists:

    Royal King 5-Foot Acrylic Skirted Bathtub LH-Drain **IN STOCK**

    WHAT SETS ROYAL ACRYLICS APART 5-Foot: 60 L x 30 W x 16 D The smooth, high-luster finish on Royal products resists:

    Royal Flexible Bathtub Drain Pipe

    PVC Flex Plastic Waste Pipe for All Freestanding Tub Installation3.3 ft long drainage hose. Connect from the bottom of the tub drain to room ground drainage hole. 1-1/2 inch…

    Royal Waste & Overflow Drain for Drop In & Alcove Tub- Chrome

    A waste and overflow kit designed to fit most drop in or skirted bathtub applications. Open and close the bathtub drain with a simple Tap of your foot. Featuring solid ABS construction and enclosed…

    Freestanding Tub Drain Installation: Things You Need To Know

    In as much as dealers of freestanding tubs recommend that you hire the services of experts. The installations process is simple for you to try it in your home.

    The only thing that youll need for freestanding tub installation is the desire to do it yourself. Then try it after understanding the steps. Get your materials ready, youll feel happier after installing it.

    Don’t Miss: Basement Drain Backing Up In Winter

    Perks Of Installing A Freestanding Bathtub

    • One of the best things about the freestanding tub is that it is easily raised and lowered from the drain. This provides easy access to plumbing if needed!
    • Using the flexible supply lines allows for test installing everything before the apron is put into place. Then we could easily unhook and re-hook it to put the tub into the apron.

    One Of The Best In Contemporary Styling And Functionality Available In A Full Sizes Of Bathtubs Frequency Buy With Woodbridge Freestanding Bathtub Faucet

    Easy Freestanding Tub Installation – WHY YOU NEED THIS!!! – Island Tub Drain
    • Exterior Size : 59″ L x 29 1/2″ W x 23 1/4″ H Capacity: 55 Gallon Max water depth : 14 1/2″
    • High glossy white acrylic construction, double walled design for max insulation and warmth

    • Non-Slip Bottom: Meet ASTM standards of slip resistance bottom yo keep our customer safe while providing a smooth easy to keep clean surface that won’t discolor over time.

    • Relaxing and comfortable : Ergonomic Douber Ended design forms to the body’s shape for ultimate comfortable lounging.

    • Premium quality acrylic construction reinforced with fiberglass for strength and durability that will provide years of use and satisfaction.

    • With a keen Focus on comfort & depth. each WOODBRIDGE bathtub is crafted to support the body’s form and provide a deep, satisfying soak.

    Also Check: Unclog Ac Drain Line Cost

    Installing A Freestanding Bathtub: One Room Challenge Week 5

    Disclaimer: The post may contain affiliate links, meaning, at no additional cost to you, I will make a commission if you click through and make a purchase.

    Its week 5 of the One Room Challenge! Im so excited, only one more week until I can do the big reveal of our finished remodeled Master Bathroom! Its so beautiful, I cant wait for you to see it! To hold you over until then I want to fill you in on how we installed our gorgeous freestanding bathtub! Dont forget to check out the One Room Challenge Blog to see all of the great renovations happening right now.

    Once the luxury vinyl tile was installed in our bathroom, it was time to install the bathtub. One of our biggest dilemmas with our bathroom remodel was the type of tub we wanted to install. We knew that we did NOT want another tub with jets or another built in tub. We were also worried that the limited space wouldnt fit a freestanding tub while providing enough room around it to enter the tub.

    Determine The Type Of The Tub

    Before installing freestanding tub in your bathroom. Its wise to consider your bathroom space, function, and its blend with other fixtures.

    1. Functional or Decorative

    The best freestanding tub must be functional and decorative. This means its beautiful and attractive. Thus, it should serve its need in the bathroom as a bathtub. Besides, the tub should exude luxury and style. In fact, freestanding tub is a bold and eye-catching piece of art.

    If youre not experienced about freestanding tubs to buy, you should make some research. Also, you can visit the bathtub shop to examine the products yourself. Your bathroom is a place youll spend more of your time. Do your best to buy the best.

    2. Tub Compatibility with Bathroom Space

    Freestanding tub has its charm that lights your bathroom environment. Freestanding tubs are available in various shapes and sizes. Besides the various shapes and styles of the tub is its material makeup. Youll find those of stainless steel, cast iron, stone, acrylic, and copper. Among these materials, acrylic tubs can withstand less impact but offer more elegant visual appeal with a bright finish.

    You may choose to mount it straight on the floor on some traditional legs. Freestanding tubs are very versatile in style. Youll love the claw foot style, cocoon or egg-like shape. Your choice in style and shape is determined by your bathroom space.

    You May Like: Why Is My Phones Battery Draining So Fast

    Place The Freestanding Bathtub

    Every freestanding tub has a drain kit. Check to ensure that the drain nut is there. Also, check if the waste location in the bathtub aligns with the drain hole on the floor. You can measure the drain under the bathtub to know its level of alignment with the floor.

    Place the tub by the side on a blanket. You can support it with cardboard.

    Maintaining A Freestanding Bathtub

    Flexi Dinger

    After installing the tub correctly, the next thing you need to learn is the maintenance tips. Aside from installing it correctly, another thing that will help increase the service life of your bathtub is regular maintenance.

    The following tips below will guide you on how to maintain different types of freestanding tubs.

    • A cleaning compound should be used for removing any light scratches and polishing the surface of the tub.
    • Always inspect the drain hole to see if there is any dirt or debris in it. Remove the dirt and debris with a small stick to avoid blockage.
    • Bleach solution is used for removing stains. Prepare and apply the bleach solution to the stained area. Leave it for some minutes and rinse it later with water.
    • Alcohol will help to remove paint, ink, grease, and oil stains. Rub a little quantity of alcohol on these stains to remove them altogether.
    • Bleach solutions alone may not be able to remove more severe scratches and stains. You will have to use fine sandpaper to remove these scratches and stains. You can also use sandpaper to repair some damaged surfaces on your tub.
    • One of the things that create problems in the water heater is the presence of greasy and rusty substances in the water. So, therefore, you need to clean the tub and water heater regularly.

    Read Also: How To Keep Drains Clear

    Choosing The Right Place

    The first thing you need to do is to identify the best place to keep the tub. Depending on the size of your bathroom, you may decide to place it at the center beside the window.

    When choosing the right place to keep the tub, the only thing you need to consider is the nearness to existing plumbing installation.

    NOTE: If you are placing it far from the existing installation, you will have to do some plumbing work before starting the installation process.

    Tools & Materials Needed For Installing A Freestanding Tub

    One important thing you need to do before installing a freestanding tub is to prepare all the necessary tools and materials needed for the job.

    Please enable JavaScript

    Gathering all the tools and materials before starting the job will allow you to finish the job on time without any delay.

    The tools and materials required are:

    • Bathtub
    • Compatible with your bathroom space

    Recommended Reading: How To Use Thrift Drain Cleaner

    Freestanding Bathtub Maintenance Tips

    Now that you know how to install freestanding tub, what about its maintenance routine? The following tips will help you maintain your freestanding bathtub or other bathtub types.

    • Check your drain to see if its clogged with hair. Use a small stick to pull the hair out.
    • Use a mild cleaning compound to polish the surface and remove any light scratches.
    • Make a bleach solution by mixing bleach with water in the ratio of 1:10. Apply the solution on the surface of the tub. Leave it for about 10 minutes to remove the stains.
    • Use fine sandpaper to remove the tougher stains and scratches. Sandpaper can repair some of the damaged surfaces of an old freestanding bathtub. Try to remove the dirt and dust by washing the tub with water.
    • Use 800-grit sandpaper to sand the surface. Dry the surface and polish it to reveal the smooth finish.
    • Rubbing the tub with alcohol will remove oil, ink, paint, and grease stains.
    • The presence of rust and greasy substances in your water indicates a problem in the heater. Youll clean the water heater and then clean the tub.
    • Follow the instructions of your freestanding tubs manufacturer on installation and maintenance.

    In conclusion, freestanding tubs can enhance the beauty and functionality of your bathroom. Its true that installing freestanding tub is easy and straight if you adhere to the steps weve provided.

    Adhering to the manufacturers maintenance routine will increase its productive years.

    Fully Integrated Sealed Overflow & Drain System No Leaks

    New Optional Flex Drain Hose Installation

    WOODBRIDGE Freestanding Tub fully integrated sealed overflow and drain system is designed to not only meet and exceed UPC code requirements, but also to prevent risks of future leaks or potential damage during the installation process. Huge upgrade to the exposed filexible PVC that is being used by others.

    Also Check: 100 Ft Drain Snake 3/4 Inch

    Installing The New Stopper

  • 1Twist or screw on the new stopper, if necessary. If the stopper isnt already connected to the flange, attach it according to your products instructions. If it’s a foot lock or lift-and-turn design, either twist it clockwise by hand or secure it with a screw.XResearch source
  • Specific installation steps vary, so be sure to follow the new drains manual.
  • 2Thread the linkage through the overflow hole if you have a lever drain. If youre installing a lever-style drain, insert the plunger and linkage into the hole in the tub wall beneath the faucet. Feed it into the overflow pipe, screw the overflow faceplate onto the opening, then screw the new drain plate onto the flange.XResearch source

    Tip: Keep in mind the linkage rod catches hair and other debris, so it requires regular cleaning. Stick with a lever-style drain if you prefer that design and don’t mind cleaning it. For a lower maintenance option, go with a lift-and-turn stopper.XResearch source

  • 3Add some water to the tub to test the seal. After youve installed the new drain, close the stopper and fill about ¼ of the tub with water. Let it sit for an hour, then go back and see if any water drained. If its around the same level as an hour prior, congratulations! Youve installed your drain successfully!XResearch source
  • If the seal isnt watertight, inspect the drain flange. Make sure its sitting flush with the tub and, if necessary, remove and reinstall it.
  • RELATED ARTICLES

    Most Popular