Monday, November 27, 2023
HomeExclusiveInstalling New Bathroom Sink Drain

Installing New Bathroom Sink Drain

What Is The Standard Size Of A Kitchen Sink

How to Install a Bathroom Sink Drain | Repair and Replace
  • Kitchen sink widths range from 24 to 36 inches. The most common sizes are 30 inches or 33 inches.
  • Single-bowl sinks are typically 30 inches wide, while double-bowl sinks are 33 to 36 inches wide.
  • A standard kitchen sink is 8 to 10 inches deep and measures 22 inches from front to back.
  • Some retailers refer to the sink’s width as the length.

How Much Does It Cost To Install A Bathroom Sink Drain

Many homeowners are hesitant to tackle small plumbing projects like installing a new sink faucet or drain, but the truth is, with the right kit and instructions, there’s nothing to fear. You will save significant money by installing a new sink drain yourself without hiring a plumber.

For most of the components, you will need to install a new bathroom sink drain, youre looking at an estimated cost of around $50-$65. A professional plumber typically charges between $100-150 for a drain replacement.

But that cost doesn’t include any minimum visit and labor charges that are included in calling a plumber. Most plumbers charge approximately $45 to $150 per hour for labor. Some plumbers also charge a minimum call fee, meaning a minor repair like a sink drain could still cost around $350.

If you’re willing to tacking installing a bathroom sink drain yourself, it can be a great way to learn something new and save money on a small home repair.

How Long Does It Take To Install A Sink

Sink installation takes 1 to 8 hours, depending on if it’s a new install or replacement. Sink type, shape, weight, and faucet differences also affect the installation time. Replacing a sink with an exact duplicate takes less time than changing the sink type.

Sink installation time

*New construction installation may take longer.

Don’t Miss: Baking Soda For Drain Cleaning

Set The Sink In Place

According to the guide, you need to line up your sink with the vanity below. If you follow the proper guideline, you can successfully install the vessel sink.

  • Turn over the vessel and apply a bead of waterproof silicone putty to the bottom edge
  • Position your vessel sink once again into place over the vanity drain hole and when you positioned it makes sure you are using the previous marks
  • Take a few extra minutes to make sure these two holes line up exactly before the silicone putty dries
  • If you see any extra caulk oozes come out of the edge, let it dry before cleaning
  • Peeled away with a putty knife after it has time to set up
  • Take your leveling tool and make sure your vessel sink is positioned evenly on the flat surface
  • Before the caulk dries, make adjustments as necessary
  • Allow the caulk to dry before you do the next step

Does It Matter Which Way The P

how to install a sink drain

When installing a P-trap, does it matter which way it goes?

The answer to this question is both yes and no. The main purpose of a P-trap is to prevent sewer gases from entering your home. Therefore, it is important that the P-trap is installed in the correct direction so that it can do its job properly.

If the P-trap is installed backwards, it will not be effective in preventing the entry of sewer gases. In fact, it could actually cause the gas to enter your home. This is because the water in the trap will not be able to flow properly, and it will create a vacuum that will suck the gas in.

However, if the P-trap is installed correctly, it will not matter which way it goes. The water in the trap will flow properly and will prevent the entry of sewer gases.

Read Also: 4 Inch Perforated Drain Pipe With Sock Menards

Should A Bathroom Sink Match Countertops

No, there is no rule that bathroom sinks should match the countertops. In fact, in most cases, it would be impossible to have your sink match. This being said, you should definitely choose a sink that complements the countertop that you are using. For example, if your granite is green, but flecked with black, a matte black sink would be appropriate.

How Much Does A Plumber Charge To Install A Sink

Average plumbing estimates are $230 to $650 for labor to install a sink. The plumbing cost to hook up a sink depends on the sink type and whether the installation includes a faucet or disposal. Installing a pedestal or undermount sink costs $230 to $800 in labor.

You May Like: Drain Cleaner Baking Soda Vinegar

What Happens If P

If your P-trap is installed backwards, wastewater will not be able to flow out of your plumbing system properly. This can cause wastewater to back up and flow out of your drains, creating a messy and unsanitary situation. It is important to ensure that your P-trap is installed correctly to avoid these problems.

Connect Drain To Plumbing Pipes

How To Install Bathroom Sink Drain/Faucet, No Leaks Under Gasket, Threads [SOLVED]

You need to connect your drain to the sink bowl when you install the bathroom vessel sink drain. After installing the upper portion, you have to look under the vanity. If the drainpipe is too long for the area under the vanity, use your hacksaw to adjust the length. Connect the pipe that extends straight out of the bottom of the drain to a P-trap.

You May Like: 100 Ft Drain Snake 3/4 Inch

Attach The Pivot Rod To The Drain

Next, connect the pivot rod to the drain and clevis. Finish by attaching the clevis to the faucet behind the water line. Since the clevis and pivot control the stopper, you’ll want to ensure that they’re connected and working properly so your sink will stop as needed. If you are also installing a faucet, you’ll want to reconnect the waterline and ensure that everything is sealed.

Cost To Install Kitchen Sink Plumbing

The cost to install kitchen sink plumbing is $450 to $1,800 per fixture if new pipes and drain lines are required. The cost to replace existing kitchen sink plumbing pipes is $100 to $350 on average. Plumbers charge $45 to $150 per hour to replace pipes under a kitchen sink.

Installing new plumbing is common in older homes or in a kitchen remodeling project where the layout changes.

Return to Top

Don’t Miss: Right Hand Drain Shower Base

Hiring A Plumber For Sink Installation

Before hiring a plumber near you to install your sink, be sure to:

  • Get at least three estimates to compare.
  • Look for licensed contractors or plumbers with sink replacement experience.
  • Browse their reviews on HomeGuide, Google, and the Better Business Bureau .
  • Select companies that are insured, bonded, and have been in business for more than five years.
  • Avoid selecting the lowest quote as quality may suffer.
  • Get a detailed estimate, contract, and warranty in writing before the work begins.
  • Never pay in full before the installation starts. Use a payment plan instead for work completed.

Mistakes To Avoid While Installing Bathroom Sink Drain

How to Install a Bathroom Sink Drain : 4 Steps (with Pictures ...

Many things can go wrong when you go for DIY bathroom sink installations. So, I will try my best to include all those mistakes in one place. Here is a list of these mistakes:

  • Forgetting To Turn off Water
  • Using The Wrong Tools
  • Using Too Much Plumbers Putty
  • Infrequent Maintenance of The Sink Drain

Lets explain those avoidable mistakes in detail

  • Mistake 01: Forgetting To Turn off Water

It may sound silly but I bet you have done this at least once in your life. Any plumbing task must begin with turning off the water supply.

If you forget to turn off the water valve, the water will rush into the pipes and cause flood-like mess.

  • Mistake 02: Using The Wrong Tools

It needs professional grade hand augers, wrenches, and other specialized tools to successfully install the bathroom sink drain.

Many DIY enthusiasts dont have these tools or they will use the wrong ones due to lack of preparedness. That will create more plumbing problems and mess up the fittings.

  • Mistake 03: Using Wrong Parts

You cant go for any close enough parts whenever you dont have the right one. Thats the textbook case of future disaster.

Without trained eyes, its hard to know which pipes to be connected. Many people often mismatch after disassembling the pipes. You can mismatch the copper pipes with galvanized pipes as well.

I have seen people often use shoddy parts. Avoid choosing cheap parts when it comes to sink drain installation.

  • Mistake 04: Overtightening Fittings
  • Mistake 05: Using Duct Tape

Read Also: How Long Do Drain Fields Last

Diy Sink Installation Cost

Installing a sink yourself saves $200 to $500 in labor, but requires expertise and $50+ in tools. Installations require minimal supplies if the new sink’s design and specifications are similar to the old sink.

Hire a professional when installing a different sink type as it may require moving the plumbing pipes or cutting the countertop and cabinet.

Installing New Bathroom Sink Stopper

  • Carefully drop your new drain stopper into your sink drain from top. Your stopper will have a notch at the bottom to which the pivot rod will be attached. Ensuring that the notch is facing towards your cabinet wall place the stopper into your drain.
  • Along with your stopper, you will receive a plastic washer. Attach this washer to the notch of the stopper through the opening in your tailpipe.
  • Next, insert your pivot rod into your tailpipe. If your stopper and notch are properly aligned the rod will attach easily. Checking if you have been successful in attaching the rod is easy, just pull your drain stopper from top. If attached, you wont be able to detach the stopper from your sink.
  • Threading the pivot nut over the rod, hand-tighten it to the tailpiece.

IMPORTANT TIP Overtightening the pivot nut can cause damage to your pipe connections. Additionally, you might need to adjust your pivot rod in order to attach it properly to the extension rod. Hence, tighten the nut by hand until you have made all the necessary connections.

Read Also: Home Depot Dishwasher Drain Hose

Tighten The Drain Assembly

From under the sink, hold the drain tailpiece motionless with one hand and tighten the mounting nut upwards toward the bottom of the sink. Make sure the opening in the tailpiece is pointing straight back toward the wall.

Tighten the mounting nut with channel-type pliers while continuing to hold the tailpiece in place. Do not over-tighten this nut, but make sure it is secure enough so that the drain assembly does not spin in the drain opening.

How To Install A Bathroom Sink Drain: Step

how to plumb a new sink drain | quick and easy bathroom sink drain installation

Sink drains might not be the most glamorous part of your bathroom sink, but theyre definitely one of the essential components. Installing a new faucet with a matching sink drain is a minor update that gives your bathroom or kitchen a nice boost.

Moreover, learning how to install a sink drain is an easy, money-saving DIY project for homeowners. Follow these step-by-step directions to install your new drain. You’ll enjoy a leak-free sink with a drain that complements the rest of the fixtures in the room.

Read Also: Best Way To Clear Bathtub Drain

How To Replace A Sink Stopper

This article was co-authored by James Schuelke and by wikiHow staff writer, Christopher M. Osborne, PhD. James Schuelke, along with his twin brother David, is the co-owner of the Twin Home Experts, a licensed plumbing, leak detection, and mold inspection company based in Los Angeles, California. James has over 32 years of home service and business plumbing experience and has expanded the Twin Home Experts to Phoenix, Arizona and the Pacific Northwest. This article has been viewed 243,734 times.

When you pull up on that rod sticking up behind your bathroom faucet, the drain stopper is supposed to pull down and plug the sink. But what if the stopper doesn’t pull down, and you can’t plug your sink? Or, even worse, what if the stopper is stuck down and you can’t drain your sink? Your first instinct may be to call a plumber, but you can save some money and earn some satisfaction by replacing the sink stopper yourself. Whether you want to replace just the stopper mechanism or the entire drain and stopper system, you should feel confident that it is a job most DIYers can handle without much fuss.

How To Install A New Bathroom Sink Drain Pipe

Colored bathroom sink vanities will cost more as will units which have delicate designs which are hand-painted. You can utilize a vessel sink at any bathroom with counter space. Even in case you do have to stick with cream, you will find numerous different shapes, styles, and materials you can select from. Vessel sinks with table tops are frequent in many modern bathrooms.

Also Check: Cost To Install Sump Pump And Drain Tile

Installing A New Bathroom Sink

Metal sinks are generally mounted with little screw clipslike the one shown at left. Once you loosen them, they unhookfrom the sink, so that the sink can be lifted out.

The other thing to disconnect is the drain. If the trap onyour sink is the type that can be detached, then it’s easiestto just take the whole trap off. This will make putting the newsink in easier. Not all traps come off though. if the trap hasa little plug on the bottom that can be removed, it’s not the kindthat comes off.

Either way, the stem from the drain on the sink is released byloosening the big plastic nut at the end of the drain pipe part,nearest to the sink’s drain. This allows the sink’s drain to bepulled out.

There’s a funny little wedge shaped seal that will stick to thedrain pipe, and cause the plastic nut from drain pipe to stick on the stem of the sink. Be sure to put the nut and wedge shapedseal on the new drain pipe in the same way. If the seal ends upgetting wrecked, you can actually buy these seals new whereyou buy plumbing parts.

With the sink removed, it’s time to clean the crud from around the edge.

I was replacing the sink with a porcelain sink. There were no clipsthat go on the bottom of the sink. The only thing to hold it inplace is gravity, and caulking.

With the bead of caulking on the sink, I carefully then lowered itover the hole, making sure that it’s centred right.

And the sink all done and installed, with new faucets. Looks much better than the old one.

Bathroom Sink Drain Installation Mistakes To Avoid

How to Install Bathroom Sink Drain with Your Own Hand

Only a professional should do this because installing a sink drain is not your regular DIY project. Its an extensive work. But if you are confident, you can do this for sure.

You can be successfully done it if you can avoid certain mistakes like adding too much putty or over tightening connections, etc. while installing a bathroom sink drain.

New DIY enthusiasts do these mistakes a lot! So, lets talk about those mistakes and see how to avoid them.

You May Like: 100 Ft Drain Auger Cable Replacement

Removing The Old Sink

  • 1Turn off the water supply valves. Look for 2 valves below the sink and turn both of them completely to the right in order to cut off water to the sink. If the valves are really old or stuck in place, turn off the water at the main water supplythis is usually near your water meter or on a lower level of your home.XResearch source
  • Test that you cut the water supply by turning on the faucetno water should come out. If it does, turn the valves more and check again.
  • 2Disconnect the P-trap and water supply lines. Since water is always in the P-trap, place a bucket under the sink and unscrew the P-trap by hand. Then, use an adjustable pipe wrench to disconnect the hot- and cold-water supply lines from the shut-off valves in the wall.XResearch source
  • If you can’t fit a bucket in the space under the P-trap, just lay an old towel underneath it to absorb the water that comes out.
  • 3Slice through the old caulk around the sink and lift the bowl out. Take a utility knife and carefully cut through the old caulk to separate the sink bowl from the countertop. Then, pull the bowl away. If it’s stuck, pry it out with a flat-head screwdriver.XResearch source
  • Some metal sinks are held in place with metal clips that you need to unclip in order to remove the sink.
  • Be careful that you don’t damage the vanity countertop when you slice through the caulk around the sink’s bowl.
  • Your Sink Drain Stopper Will Have These Essential Parts

    • The lift handle

    And various other small nuts and bolts that youll use to attach these components. I suggest once you remove these parts, place them on a towel over your sink counter or table. Once you have disconnected all the parts, you can either take them to your favorite home improvement store as a reference to buy the new parts. Conversely, you can do what I did, find the name of the manufacturer of your existing parts, and buy them online.

    Whats important is that you have all the proper components. There are numerous important connections youll need to make to successfully install your bathroom sink stopper, such as

    • Connecting the Pivot Rod to your tailpipe
    • Securing the Lift Handle to the Extension Rod
    • Attaching your Pivot Rod to your Extension Rod

    Additionally, you can follow the steps mentioned below to attach a sink stopper to your new bathroom sink. Also, when you choose to replace your bathroom sink faucet, it is good practice to replace your bathroom sink stopper with it.

    Once you have all the necessary components, shut off your main water valves and place a bucket beneath your pipes. Open your faucet to drain any excess water.

    Read Also: How To Stop Apps From Draining Battery Android


    Most Popular