Tuesday, December 5, 2023
HomeNewsMaytag Washer Won T Spin Or Drain

Maytag Washer Won T Spin Or Drain

Check The Lid Switch Assembly

Maytag Washer Won’t Spin or Drain – FIXED at NO COST

The lid switch assembly stops the washer from spinning when the lid is not closed properly. When it becomes faulty, your Maytag washer wont spin. To test the lid switch, youll need a multimeter.

Heres how to check it:

  • Make sure the power is switched off.
  • Locate the lid switch .
  • Test the lid switch for continuity with your multimeter.
  • If the test shows the switch has continuity, then it is fine, and you can move on to checking the drive belt. However, if it fails the continuity test, you will have to replace the switch.
  • Make Sure The Wash Load Is Properly Sized And Balanced

    Overloading the washer with too many items or a single item thats too large can result in a Maytag washer not spinning clothes dry. If the washer drum is too heavy or unbalanced, with too much weight on one side of the drum, it can slow the spin speed. This will leave clothes wet at the end of the wash cycle and result in longer drying times.

    Follow these tips to make sure your wash load spins properly:

    • Check your user manual to determine your washers capacity. Avoid overloading by only filling the washer ¾ of the way full with each load.
    • Balance a large or heavy item with one of a similar size. If your top load washer has an agitator, make sure large items are evenly arranged around it.
    • If the load becomes unbalanced during the spin cycle, pause the cycle and reposition items evenly around the washer drum before resuming.

    Two: Check The Drive Belt

    A drive belt connects the transmission to the motor, and you can find it underneath your Maytag Bravos washer. Once emptied and unplugged, tilt your washer until it is lying on its front panel.

    Remove the shield from the bottom of the appliance and check if the belt is loose or broken. You can attempt to tighten it if loose, but you need to replace it if it is broken.

    You May Like: Sink Drain With Dishwasher Connection

    Tip #: Check Drive Belt

    Finally, if your Maytag top load washer wont spin, look at the drive belt to see if its loose, damaged, or broken. If you also find your washer making loud noise when spinning, the drive belt may be the culprit. Remove the back panel of your Maytag washer and locate the drive belt to see if its on the pulley system.

    If loose, simply tighten the belt on the pulleys. However, if the belt is otherwise frayed, damaged, or broken, it needs replacement.

    If your efforts to troubleshoot a Maytag washer not spinning yourself prove difficult or the repair is too complex, contact Sloan Appliance Service for your Maytag washer repair needs.

    The Lid Switch Isn’t Working Properly

    Maytag neptune washer wont spin or drain. Drain pump will work but it ...

    The lid switch determines whether the lid is closed properly and, as a safety feature, is designed to keep your washer from spinning if not. While on most models the washer won’t spin at all if the lid switch isn’t working, some models will allow the washer to fill but not spin.

    If you’re dealing with a top-loading washer not spinning, an impaired lid switch is one of the most common causes and should be one of the first things you check, especially if your issue is a top-loading washer that fills and agitates, but doesn’t spin properly. You can find the lid switch underneath the lid, on the top of your machine. Check to see if it makes good contact, or if it’s bent. You may be able to bend the switch back into shape, or you may need to have it replaced. There are many steps and it’s pertinent that you use the correct replacement part, so we recommend reaching out to a washing machine repair professional for help.

    Recommended Reading: Black Mold In Shower Drain

    Reasons Why Maytag Washer Not Draining Lets Fix It

    We all know that Maytag washers are some of the most reliable washing machines on the market. However, if your Maytag washer not draining, get your hands dirty and follow our troubleshooting guide to fix it.

    The Maytag washer is one of the most popular brands of washing machines around the country. With their long history of making quality appliances, its no wonder so many people choose Maytag washers. However, these machines will experience problems over time. One common problem with the Maytag washer is that it wont drain. This can be frustrating to people who want to get back to their everyday routine.

    Below, we will discuss a few simple solutions that you can try out to fix the Maytag washer drain issue. One of these steps should resolve your problem with no further hassles.

    What To Do If Maytag Centennial Washer Wont Spin

    The first thing is to keep your head cool and have a deep breath. People dont avoid this washer brand for such simple problems.

    Also, dont worry about the sopping wet clothes for now. Everything will work out great.

    I will start from a very basic inspection . Gradually, I will move to more difficult parts. Follow this troubleshooting guide and solve the spin problems:

    The extra load will cause your Maytag Centennial washer not to spin. You may have seen it before, jammed clothes can make any washer spinless. This is the most common cause of that particular problem.

    This is why it happens

    Extra-large clothes will end up on one side of the drum and create such problems. There could be jammed clothing outside the drum too.

    Remove some clothes from the drum or outside the drum and run the spin cycle again. If it does not solve the problem, check the next tips.

    • Broken Motor Coupling

    It connects the motor and transmission and thats how the washer drum gets the power to function. So, if its broken or failed somehow, the spin cycle of your washer wont be working.

    If the washer repeatedly goes through heavy loads, the motor coupling may fail prematurely and damaged permanently. If its damaged, you need to replace it.

    • Clogged Drain Hose

    If the drain hose is clogged, it wont spin or rinse. To be sure, take off the drain hose from the back of the washer. Now, run water through the hose to make sure its not clogged.

    • Faulty Lid Switch

    Inspect the lid switch carefully

    Also Check: Tub Won T Drain But Not Clogged

    Inspect The Rotor Assembly

    The rotor works in conjunction with the stator to make the drum spin. The rotor has several magnets on it that when damaged will stop the tub from spinning.

    Heres how to check the rotor:

  • Locate the rotor.
  • Once located, you need to inspect the magnets for any signs of damage as well as the rest of the rotor component.
  • If you find any part of the rotor is damaged or faulty, the whole unit will have to be replaced.
  • Five: Undo A Kinked Hose


    A kinked hose means erratic water flow that results in a washer trying to spin but never picking up speed. Aside from this problem, a kink in the hose will also result in your washer not being able to drain water. Pull out the washer and check, then carefully move it back and make sure not to crimp the hose.

    Read Also: How Do You Get Rid Of Smelly Drains

    Is The Drain Hose Kinked Or Is The Drain Clogged

    Make sure that the drain hose is not kinked or clogged. Straighten the hose for adequate water flow. Remove any blockage from the drain hose, drainpipe or utility sink. Use the U-shaped drain hose form on the drain hose, and secure the drain hose. See the Installation Instructions for further details.

    Help Why Is My Maytag Bravos Washer Not Spinning

    As soon as you open the washer and find soaking wet clothes its usually clear that something is wrong with the spin cycle. Whats less clear is why theres a problem. When top load washers dont spin appropriately there are typically several possible causes. Well troubleshoot the most common reasons for a Maytag Bravos washer not spinning, including an unbalanced load and damaged drive belt.

    Read Also: How To Clean The Dishwasher Drain

    Wax Motor On Maytag Neptune Washer

    What it is: Maytag Neptune washers, in particular, have something called a wax motor.

    That name comes from the fact that a wax motor converts heat into mechanical energy through the melting of waxes.

    Simply put, the motor works by melting the wax and expanding the plunger until it presses on a switch.

    You can find the wax motor as part of the door latch assembly. When the wax motor expands, itll push the plunger against an enable switch that signals to the machine that the door is shut so it can begin the washing cycle.

    Why it fails: When a wax motor is faulty, it will not be able to expand far enough to push the enable switch on the door latch assembly.

    As a result, the washer will not sense that the door is shut, and wont spin or begin the wash cycle.

    How to fix: Replacing the wax motor requires access to the door latch assembly. Youll need to remove the top access panel on the Neptune washer to do this.

    Remove the existing switch and its electrical connector before putting the replacement in its place.

    The most important part of this process is to put the motor in a precise position.

    If the switch is placed wrongly, the plunger will not be able to reach the enable switch.

    Is The Lid Open

    Maytag Washer Won

    If the lid is lifted during a cycle, the machine will stop. To continue the cycle, close the lid and you may have to select the Start button again. The lid must be closed during operation for the washer to fill with water, and then to wash, drain, rinse and spin.

    Watch the below video for more information on proper drain hose installation.

    If you would like to download or view product literature for your appliance, please visit our Manuals and Literature page.

    Read Also: 72 Inch Shower Base Left Drain

    Check The Drive Motor

    The next component to check is the drive motor. When it stops working correctly, your washer wont spin.

    Heres how to check it:

  • Turn the power off at the wall, and then check that the power is getting to the drive motor by testing it with a multimeter.
  • If the power source is ok, turn the washer on and check if you can hear a humming sound coming from the drive motor or if it is overly noisy when running. If it is overly loud or is making a humming sound, the drive motor should be replaced.
  • Once replaced, turn the washer on and check if the problem has been solved.
  • The Connection On The Motor Is Broken

    It links the motor and gearbox, and it is through this connection, that the washing drum receives power. So, if it is faulty or fails in some way, your washers spin cycle will not work.

    If the washer is subjected to severe loads regularly, the power connection may cease to operate and be seriously affected. You must replace it if it is damaged.

    Read Also: Maytag Washer Won T Drain Or Spin

    Check The Wash Cycle And Spin Setting

    One of the most common reasons for a Maytag top load washer not spinning is an incorrect wash cycle or spin setting. GENTLE, HANDWASH, or DELICATE settings utilize slower spin speeds for more fragile fabrics. Some model washers also allow you to vary the spin speed, making it slower or more rapid, for different loads.

    Before starting a wash cycle, make sure youve selected the right setting and spin speed for your particular load.

    Three: Check The Motor Coupling

    Customer called in her Maytag washer wont spin or drain

    The motor coupling is the connection between the washer motor to its transmission. Access the motor coupler from behind the cabinet of your washing machine. You may need to pull out the pump and the motor.

    Inspect the coupler for broken pieces, especially since several of its components are usually made of plastic. If broken, you will need to procure a replacement.

    Read Also: My Whirlpool Washer Won T Drain

    The Load Isn’t Balanced Properly

    If you’re trying to wash only a couple of heavy items, your washing machine may not spin or may not spin effectively. This often occurs when you’re washing things like a comforter or shoes. Open the machine and shift the items around to balance the washing machine load, and your washer can spin more effectively. Adding more items to help balance a load can be effective, too, as long it doesn’t overfill the machine.

    Clogged Drain Pump Filter

    if you hear that the pump is running but water isnt going down, its likely that theres a clog in the pump filter. This can lead to a complete lack of water flow or a slow-down in the stream and can be fixed by taking out the pump filter and cleaning it.

    Unplug the washer from the outlet, and carefully pull it away from the wall. If you can see or easily reach the filter, remove it. If not, unplug the washing machine and look at the back panel for a removable filter.

    Unplug the machine and unplug the wall. Remove the access panel on the back of the machine and locate the drain pump. Unscrew the pump, remove the hose from the inlet side of the pump, and check if there is any debris in this hose. If you find any debris, clear it out and screw that hose back in.

    You May Like: How To Fix Sink Drain Stopper

    What To Do When Your Washing Machine Wont Drain

    A functional washing machine is an effective tool for getting dirt, sweat, and stains out of clothing. The exact way the washer cleans your clothes depends on the precise settings you choose, but the basic premise is the same: first, the drum fills with water when you hit Start. After the wash cycle, the drum drains, and the first spin cycle begins. Then, the drum refills to rinse the clothes with clean water. Finally, the machine drains one final time and spins the clothes dry.

    If you open the lid after the washer stops running to find your clothes swimming in water, something is obviously wrong. The drum wont drain, that much is certain, but why? To get to the bottom of it, follow these troubleshooting tips before you call in a professional for help.

    Tip #: Inspect Lid Switch

    I have a Maytag Washer, Model LAT3914aal, that will not agitate, spin ...

    If youre wondering why your Maytag top load washer isnt spinning your clothes dry, check the lid switch.

    The switch prevents the washer from spinning while the lid is open. This is usually a handy feature. However, if this switch fails, the Maytag washer wont spin even if the washer lid is closed.

    Check for a faulty lid switch by first inspecting the plastic tab on the lid that triggers the switch when closed. If damaged, it may be failing to trigger the lid switch.

    If all seems well with the tab, the next step is to check the switch itself. Listen for a click when you close the washer lid. If you dont hear it, then the lid switch is most likely broken and needs replacement.

    You May Like: Water Coming Up From Floor Drain

    How To Fix Your Washing Machine

    It could be as basic as altering detergents, adjusting a hose, or leveling the machine if your washer is not functioning right. Some troubles will necessitate professional guidance, so it is critical to understand what you can do yourself and require a service call.

    Our article will assist you in repairing your washing machine for various situations.

    If you have a front-load washer, a clogged drain pump filter is likely to be the source of the troubles stated below, such as draining, spinning, and stench. To begin, clear the outlet pump filter of any dirt or lint, as well as any remaining water.

    If you have a Maytag® washer, check your Owners Manual for model-specific cleaning recommendations or use Maytag Product Help. If washing the drain pump filter does not solve the problem, continue reading more troubleshooting advice.

    Water Inlet Valve Problems

    The hot and cold hoses of this valve connect to the water mains, and it is responsible for filling your machine when you choose a cycle.

    This valve can stop working due to several reasons but, in such cases, it keeps water inside your machine, which causes the drain pump to engage.

    In order to correct this issue, first, you need to check the screen/filter or keep a bottle of vinegar onto it, as vinegar is an easy way to clean out the obstruction and see whether or not this helped unclog it.

    The second thing you need to do is remove the valve from its position and test the Solenoid Valve using a multi-meter between 500-1500 and then replace it if there isnt any activity.

    Recommended Reading: How To Fix Phone Battery Draining Fast

    How Do I Make My Maytag Centennial Spin Again

    Now that you know the possible causes of the issue, you are probably wondering how to fix them and get your washer back spinning again. Here are some troubleshooting tips for you.

    1. Get Rid of Excessive Load

    For your washer to spin properly, make sure that you place the correct load size and balance them properly. To help with this, you can read the user manual to understand the washers capacity. The other tip is to balance the clothes evenly on the drum before spinning.

    2. Examine the Lid Switch Assembly

    If the washer lid is properly closed and the machine isnt spinning, then the lid switch assembly could be faulty. To examine it:

    • Switch off the power.
    • Find the lid switch on your machine.
    • Use a multimeter to test the continuity of the lid switch.
    • If the switch fails the continuity test, ensure that you replace it.
    • Inspect the Door Latch

    Inspect it for signs of damage that may prevent it from closing properly. In this case, you may need to replace it. If not, then a multimeter will prove helpful to test the door latch switches for continuity. If the switch fails the continuity test, dont hesitate to replace it.

    3. Clean the Drain Hose

    Cleaning the drain hose can be a straightforward way to solve the spinning issue on your Maytag Centennial. Start by inspecting the drain hose for signs of things that may clog it. This can include things like dirt, lint, coins, and more.

    4. Remove Stuck Items

    5. Tighten or Replace the Drive Belt

    6. Replace the Motor Coupling


    Most Popular