Wednesday, November 29, 2023
HomeReplaceToilet Drain Pipe Replacement Cost

Toilet Drain Pipe Replacement Cost

Sump Pump Repair Cost

How To Replace A Bathtub Drain (And What It Costs!)

Sump pump repair costs$200 to $870 on average. The sump pump needs to function properly to keep low-level areas dry. Call your plumber if the pump is clogged, theres no water in the basin, its making strange noises, its running continuously, or the pipes have burst. Our sump pump installation cost guide covers the replacement prices in detail and pricing factors based on size.

Cost To Install A Toilet Drain Pipe

These estimates are for BASIC work performed in serviceable conditions by qualified trade professionals using MID GRADE materials. Work not mentioned on this page and/or work using master craftsman, premium materials and project supervision will result in HIGHER COSTS!

These estimates are NOT substitutes for written quotes from trade professionals. Homewyse strongly recommends that you contact reputable professionals for accurate assessments of work required and costs for your project – before making any decisions or commitments.

The cost estimate includes:

  • Costs for local material / equipment delivery to and service provider transportation to and from the job site.
  • Costs to prepare the worksite for Toilet Drain Pipe Installation, including costs to protect existing structure, finishes, materials and components.
  • Labor setup time, mobilization time and minimum hourly charges that are commonly included for small Toilet Drain Pipe Installation jobs.

The cost estimate does NOT include:

Cost To Dig Up & Replace A Sewer Line

The cost of digging and replacing a sewer line is $50 to $450 per foot, or $3,000 to $6,000 on average, but could cost up to $30,000 if the whole sewage system needs to be replaced. Repairing a 10- to 15-foot section of sewer pipe costs a minimum of $1,500, or $2,500 for cast-iron pipe. This method is tedious, as the sewer contractor must avoid damaging the sewer pipes or underground utility lines.

Other additional factors which affect the price are:

  • Type of pipe vitrified clay or PVC
  • Width of pipe 4, 6, or 8
  • Fitting, valves, and accessories Each foot of connections alone will cost $52 $107 per linear foot.
  • Long run or short run of pipe multiple bends and connection points
  • Street work or residential traffic help and pavement and sidewalk costs required if theres street work involved
  • Connect in the street or an alley about $640 $1,140 cheaper if its in an alley

You May Like: Drain Snake Won’t Make Turn

Sewer Line Repair Will Be Necessary

If you own your own home or property that has sewer lines, they will have to be repaired. Age and environmental issues will happen regardless of how careful you are with your sewer line.

Sometimes we flush things we shouldnt, and this will lead to sewer line repair. If you have ever had a small child in your home, there is no telling what might get flushed down your toilet and into your sewer line.

Landscaping Restoration Is Often Part Of The Service

Replacing Drain Pipe In Bathroom Sink / McAlpine 1.1/4 Basin Waste Pipe ...

When you agree to a sewer line replacement, theres a good chance that you also agree to have part of your yard excavated. After all, sewer lines are located deep beneath the soil and tend to be relatively long, so theres virtually no way to remove one without unearthing it.

But this excavation process can leave your yard in rough shape. You can expect large piles of dirt, dead grass, and destroyed landscaping.

Fortunately, most sewer line service technicians wont leave your home in this state.

After installing a new sewer line, most plumbing service providers will bury the new pipe beneath the same soil they dug up. Theyll also tamp the ground to ensure that its adequately compacted, preventing it from leaking when stepped on.

Some providers will also apply fresh layers of sod to restore your lawn to its pre-replacement condition. However, this is generally where the landscaping restoration part of the job ends.

Consequently, you may need to hire a landscaper to work on your yard after a sewer line replacement. Depending on the area youre looking to restore , you could end up spending about $10 per square foot on post-replacement landscaping services.

You May Like: How To Clean Sink Drain Bathroom

Replacing The Toilet Flange Process

Before starting the job, turn off the water supply to the toilet and disconnect the water supply hose.

Once the water has been turned off, flush the toilet. This will empty the bowl and the tank of water since the water supply will not refill it.

When you loosen and remove the two bolts on the bottom of the toilet, make sure you put them in a safe place since you will need them when you are finished.

After you remove the toilet, clean off the wax from and remove the old flange.

Thoroughly clean the floor before putting on the new flange.

Mount the new flange on the floor with new bolts. These bolts will fit into the toilet floor.

After pushing the new wax ring in place at the bottom of the toilet, put the toilet back in place. Make sure that you line up the bolt holes carefully.

Press the toilet down to ensure that it fits snugly with the wax against the flange.

Reconnect the toilet to the floor using the bolts, and then turn on the water supply once again. Make sure that you do not over-tighten the bolts since this can cause the toilet to crack.

Trenchless Drain Pipe Replacement

Trenchless drain pipe replacement requires minimal digging and no trenches.

Just like the name implies, this is a drain pipe replacement process that involves no trenching and minimal digging. Trenchless sewer repair only requires one or two access points, often 4×4 pits on either side of the house. Or we can make the access point by pulling a toilet . Sometimes, some concrete needs to be chipped away under the toilet, but this is better than the alternative, a big ugly trench through your living room and kitchen. The collateral damage of trenchless drain pipe replacement is nothing compared to the effects of traditional methods. Trenchless sewer repair always begins with hydro-jetting or another pipe cleaning solution.

Trenchless sewer repair is broken up into two subtypes,

  • Pipe lining A unique, epoxy-impregnated liner is inserted into the old pipe, inflates, and creates a new pipe structure directly inside the old one. Pipelining, on average, costs $80 to $250 per linear foot. Pipelining can be considered replacement or repair depending on whether the whole pipe length will be lined or just a section. If only a section of pipe is lined, it is considered a repair. If you line the whole pipe from start to finish, it is basically like getting a brand new pipe installed .
  • Recommended Reading: Right Hand Drain Shower Base

    How To Choose A Professional Installer

    We recommend that you contact and receive estimates from at least three contractors before making your choice. When looking for a contractor to replace your homes sewer line, here are some questions to ask:

    • Is your plumbing license up to date? Is your company bonded and insured? If youre in a state like California that requires a special license for sewer line work, does the contractor performing the work have it?
    • How is your company rated by the Better Business Bureau ?
    • How do past customers rate your service?
    • How will you determine whether the sewer line needs repair or replacement?
    • Can I receive my estimate in writing, along with any contracts or warranties?

    How Much Does It Cost To Replace Pipes In A House

    Underground Drains Clogged | What’s The Repair Cost Under Slab?

    Determining factors include the size of your home and how many floors it has, the number of plumbing fixtures and the ease of pipe accessibility. Companies will charge more when portions of plumbing systems are hard to access, such as when pipes are only accessible through small crawl spaces or closets.

    CostHelper Home & Garden adds that the cost to replace pipes in a home also depends on the kind of pipes being installed. The two options are copper and plastic. Copper is the more costly choice, and with plastic, you can choose from CPVC or PEX . Re-piping a smaller, one-bathroom home with plastic pipe might cost around $1,500 to $2,500, while the average two-story, three-bedroom, two-and-a-half bath home would be higher at $3,000 to $7,000. Expect to pay a lot more for copper.

    Recommended Reading: How To Clean Bathroom Drain

    Unit Costs: How Pros Price

    Unlike other websites that publish pricing from unrelated jobs in the past, Homewyse creates up-to-date estimates from current Unit Costs. The Unit Cost method delivers high accuracy by using location, details and options for the unique requirements of each job. Contracting, trade, design and maintenance businesses rely on the Unit Cost method for transparency, accuracy and fair profits.

    How To Determine The Cost Of Replacing Drain Pipes

    Related Articles

    How much does it cost to replace pipes in a home? According to The Repipe Company, it can run you anywhere from $1,500 to $15,000. Thats a pretty big range and can seem intimidating, but there are ways to filter it down to determine what your cost might be.

    Recommended Reading: How To Drain Clogged Dishwasher

    Cost To Replace Sewer Line Under Slab

    The cost to replace a sewer line under a slab costs $3,000 to $5,000 for smaller jobs and $15,000 to $20,000 total for larger jobs. Trenching under a slab can cost an extra $150 to $200 per foot.

    Under Slab Plumbing in Houston, TX, quotes $10,275 total for an average” under slab plumbing repair job that consists of $3,600 for outside excavation and replacement, $6,250 for the under-slab portion, and $425 for engineering and permits. The concrete needs to be broken up and a 3 x 3 trench dug throughout the house. The old pipe is pulled up and replaced, followed by backfill with sand, and then the concrete is poured.

    To avoid breaking up the slab, a trenchless sewer line can be installed instead and costs $6,000 to $12,000. The way it works is that new lining is installed inside the old pipes, and the exterior pipes can continue breaking down while the new interior epoxy lining/pipes do their job.

    Avoid Emergency Plumbing Repairs And Weekend Services

    Pin on Construction Information

    Sometimes, you don’t have a choice: If you live in a one-bath home and your toilet breaks, you can’t necessarily wait a few days for a plumber to come fix the appliance.

    But if you can wait, you can save serious money. Emergency plumbing repairs may require a plumber to drop what they’re doing and they may charge you more for the inconvenience. Weekend service can cost more, too. While the average national rate for plumbers is $45 to $150 per hour, weekend and emergency plumbing can as much as double the rate of a plumber’s usual fee.

    Recommended Reading: Pool Deck Drain Home Depot

    Bathtub And Shower Replacement Cost

    Replacing a bathtub costs$800 to $4,600, while a shower replacement costs$2,000 to $9,000 on average. Shower or bathtub liners cost between $1,700 and $2,500 for materials and installation from a general contractor.

    Bathtub and Shower Replacement Cost

    A typical tile shower 3 x 5 $2,350 $3,267

    Also, drain replacement in a tub or shower costs $200 to $700, shower valve replacement costs$225 to $575, and the shower head can be replaced for $75 to $275.

    Cost To Replace Toilet Shut

    Replacing a shut-off valve is very simple and is priced about $60 to $150. The shut-off valve is connected to a pipe between the wall and the tank that allows you to control the water supply. It is usually located to the left side of the fixture, beneath or behind the tank, and it allows you to shut off the water supply to the tank for repairs or if the fixture is overflowing or running constantly.

    Also Check: How To Change Sink Drain

    Cost To Replace Toilet Flapper

    If you need a flapper replaced, prices range from $60 to $120. The flapper is a rubber component that sits against the flush valve opening. In some older models, the tank ball does the work of the flapper. The flapper blocks the flush valve while water is in the tank and then allows that water to flow down into the bowl when the chain or handle is pulled. Flappers last around five years, but wear out over time or fall out of position, preventing things from flushing correctly. If your fixture is nearing this time, keep an eye on the flapper and replace it.

    Drain Line Video Inspection

    Bathroom Remodel 29 – Toilet Drain Replacement

    The plumber may resort to video inspection to detect the issues. Video inspection adds $200 to $400 to the overall project cost. To do this, the plumber uses a camera connected to a flexible cable that is snaked into the pipe and then uses a monitor to watch and assess what is going on in the pipes.

    Read Also: Unclog Ac Drain Line Cost

    Can Sewer Pipes Be Above Ground

    Above ground PVCu drainage pipe and fittings can only be used above ground. They will function if installed underground, but are not manufactured to the correct standards for this application, Building Regulations Part H state that PVCu materials for below ground gravity drainage should be to BS EN 1401 or BS EN 13476.

    Sewer Line Replacement Cost By Material

    Although the length of the sewer line is the primary cost factor, the type of pipe material you choose also affects your bottom line. Plastics called PVC and ABS are the most commonly used materials since they are inexpensive, lightweight, and easy to install. However, copper and cast iron pipes are also somewhat commonthough much more expensivebecause of their strength.

    In the post-World War II housing boom, many American homes had Orangeburg pipes installed for sewer lines. These pipes were composed of compressed wood fibers sealed with coal tar, but they were phased out in the 1970s because they didnt last as long as promised. A few older homes may still have Orangeburg piping, which must be replaced with a modern alternative.

    Most main sewer lines use 4-inch diameter pipe. Here are some approximate prices for 48 linear feet of each material, not including any necessary connectors or valves.

    Also Check: How To Stop Sinus Drain

    What Causes A Toilet To Clog

    Toilet clogs can be caused by something simple like using too much of the wrong toilet paper or something more serious like your main sewer line becoming damaged or infiltrated. In most cases, the reason your toilet is clogged is the result of someone flushing something they should not. Small children are infamous for flushing toys and other materials down the toilet. However, they are not the only ones in the house to blame. Adults sometimes flush things they should not, such as feminine hygiene products, tissues, and wrappers. There are also things like toothpaste caps, hair accessories, and cotton swabs that accidentally fall into the toilet and get flushed. Even too much toilet paper or fecal matter can clog a toilet. An inefficient low-flow toilet is also more likely to have clogs.

    Hard water can be the cause of some toilet backups. It is full of minerals like calcium, which get deposited into the drainpipe, clogging it. Too much chlorine can also be a problem. Chlorine is added to public waterworks to kill bacteria but can damage the plastic or rubber parts in the toilet. This can keep it from flushing properly, preventing a complete flush-out of debris. A blocked S-pipe, obstructed plumbing vents, or damaged sewer mains can also cause clogging. This ultimately causes leftover debris to become clogged. Whether you have a toy flushed down toilet drains or a buildup of hard water residue, you need to resolve the clog to prevent additional damage.

    Sewer Pipes Can Be Very Heavy And Challenging To Move

    Buy Taptree Bathroom Flexible Chrome Plated PVC Waste Pipe Drain Hose ...

    The plumbing pipes in a home might be about 1 in or 2 in in diameter, but sewer line pipes are typically much larger. These pipes are at least 8 in wide, though most are about 2 ft wide.

    Moreover, this greater size ensures that wastewater and sewage flow easily into public sewer systems. However, it can make sewer lines far heftier and more challenging to move than smaller in-home plumbing pipes.

    Additionally, sewer lines arent short. The average length for a sewer line pipe is between about 70 ft and 100 ft . As a result, removing a faulty sewer line requires heavy-duty construction equipment like pulling units and hydraulic pipe-lifting machines.

    The cost of renting or operating these machines significantly impacts the final price of the repair service. Its also worth noting that lifting a sewer line pipe typically requires the efforts of multiple people, which increases total labor costs.

    Recommended Reading: 8 Inch Corrugated Perforated Drain Pipe

    Fix A Whistling Toilet

    Repairing a whistling toilet costs between $60 and $200. If your toilet is making a whistling, humming, or jet-like sound, it may mean that you have a ballcock-style fill valve that is worn off. This is a common valve in older units and requires replacement to solve it. However, if your toilet is making a hissing sound that does not stop once the tank is filled, it may mean water keeps leaking out of the tank. This indicates a problem with the flapper, a small piece at the bottom of the tank that lets the water out of it.

    Who Do You Call For Drain Pipe Replacement

    If youre looking for a reliable, professional company that can deal with drain pipe replacement, call New Flow Plumbing. We serve the Santa Clarita, Glendale, and the greater Los Angeles area. We will assess the situation using a CCTV sewer camera inspection and give you the best solution. Contact us today and receive a quote.

    You May Like: Installing New Bathroom Sink Drain


    Most Popular