Monday, November 27, 2023
HomeFactsTop Load Washer Won't Drain

Top Load Washer Won’t Drain

Use Your Home Warranty Coverage

Top-Load Washer Wont Drain Washing Machine Troubleshooting

If youve followed all of these steps and your washing machine still wont drain, its time to call in a professional plumber or washing machine service technician. This is when complete home warranty coveragewith American Home Shield can help. With our ShieldGoldand ShieldPlatinumplans, you can enjoy awashing machine warranty.

When your machine breaks down in the future, dont pay expensive out-of-pocket costs by scheduling a repair person. Home warranty coverage helps reduce the cost of repair or replacing parts of your covered household itemsand gets your home back up and running in no time. With comprehensive coverage and flexible pricing and plans, a home warranty plan with us means budget protection when your washing machine wont drain.Learn about an American Home Shield® home warranty.

How To Drain A Washing Machine

If you are like most people, your washing machine is one of the most important appliances in your home. The last thing you need is to discover your batch of towels submerged in a full tub of water while your machine flashes an error code or simply has stopped working altogether.

If your washer is experiencing drain problems, youve come to the right place. This article covers how to identify the cause of such problems, drain your washer and hopefully fix it so that it doesnt happen again.

Blockage In The Drain Line

If all the previous assumptions did not work, then the reason why the washing machine stopped draining water, then you need to consider another possible option.

The reason may be hiding in the blockage of the drainage system. In this case, puddles will regularly appear on the floor. Fabric fibers or other debris can accumulate in the sewer outlet.

You can try using a small manual drain snake to clear the blockage. If you cannot solve the problem yourself, then you should call a plumber.

Recommended Reading: Best Drain Hair Clog Remover

Clogged Drain Pump Filter

Every washing machine has a pump to drain the water. It pumps out water from the tank after the wash and rinse cycle is completed. Pay attention to whether the pump works during washing. You will hear a characteristic sound. But what if the pump is running, but the water remains in the tank. In this case, the problem most likely lies in the blockage. The presence of debris or foreign objects obstructs or completely blocks the passage of fluid through the pump.

In this case, it is necessary to act by disconnecting the washing machine from the mains. Next, place it so that there is free access to the inside. In most front-loading washing machines, the drain filter is located at the front. However, in some devices, it may also be located at the back.

Remove the access panel and locate the drain pump underneath. Next, remove the hose that is on the intake side. Now you can check the filter for blockages. If debris is found, it must be removed and the filter washed. Now you can install the access panel in place and connect the washer to the power.

Check the machine by running a test cycle. If the problem was a clogged drain filter, then after correctly following the above steps, the washing machine will start working properly.

How To Fix A Washing Machine Not Draining

Top 8 Recommended Frigidaire Front Load Washer Wont Drain Or Spin ...

After finally deciding to tackle that mountain of laundry once and for all, spending precious time separating your colors from your whites, and proudly loading your washing machine, you find yourself hit with one of lifes inconveniences: your washing machine wont drain.

Along with stubbing your toe and getting stuck in traffic, a washing machine not draining is one of those seemingly minor things that can ruin an otherwise good day. After all, its frustrating when you go to transfer a load of clothes from the washer to the dryer, only to encounter a deluge of water remaining in the washer tub after the cycle has finished.

If your washing machine wont drain, were here to help. Learn more about the function of your washing machine drain and how to drain the washer on your own.

Also Check: How To Drain Water Away From Your House Foundation Effectively

Washer Won’t Drain Causes

First, make sure to consult your washing machine’s owner’s manual. The troubleshooting section may give you suggestions for likely reasons for drain problems. Some modern washing machines display error codes that will identify the problem for you. If this doesn’t identify the problem, observe your washing machine as it runs through one of its drain cycles. As you watch the machine in action, one of the following problems will likely be identified:

  • Clog in the rubber drain tube leading from the washing machine to the drain standpipe
  • Material obstructing the water pump filter or impellers
  • A mechanical failure of the water pump
  • Loose or broken drive belt
  • Faulty lid switch
  • Clog in the drain system

The Spruce / Alison Czinkota

Ge Washer Wont Drain Because Theres A Blockage In The Drain Pump

Water runs through the drain pump. But, a drain pump has a reasonably narrow opening. Typically clothing should not be over soiled such as caked on mud, or a lot of loose grass.

Otherwise, when the water drains through the drain pump it can cause a blockage. In other cases very small garments like a childs sock, or face mask are so small that they can get accidentally sucked down the drain pump, and cause a blockage. If you have a bit of DIY experience you can locate the drain pump, and inspect it to see if there is any stuck in it.

Just be very careful to make sure your GE washer is unplugged at the wall. Otherwise, you will need to have a repair technician inspect and fix it, if this is what the issue is.

Copyright article owner is for this article. This post was first published on 2022-09-05.

Overall, the drain pump has a clog in it, the drain pump has failed, the onboard computer needs to be restarted by unplugging your GE washer and the wall and plugging it back in again, or the drain hose is kinked or is not installed into the stand pipe correctly.

You May Like: How To Drain Water Heater

Recommended Reading: Right Hand Drain Shower Base

What To Do When Your Washing Machine Wont Drain

A functional washing machine is an effective tool for getting dirt, sweat, and stains out of clothing. The exact way the washer cleans your clothes depends on the precise settings you choose, but the basic premise is the same: first, the drum fills with water when you hit Start. After the wash cycle, the drum drains, and the first spin cycle begins. Then, the drum refills to rinse the clothes with clean water. Finally, the machine drains one final time and spins the clothes dry.

If you open the lid after the washer stops running to find your clothes swimming in water, something is obviously wrong. The drum wont drain, that much is certain, but why? To get to the bottom of it, follow these troubleshooting tips before you call in a professional for help.

Make Sure The Washer Is Level

Washer Troubleshooting: Top-Load Washer Won’t Drain – How to Fix Your Washer |

If your washer is not level, then the wash water will not drain, either due to a failsafe switch or the pump failing to work due to the tilt.

Use a spirit level to check that the washer is level. Remember to check both left to right and front to back. If the washer is not level, adjust the adjustable feet if your model has these. Otherwise, you can try to add flat pieces of wood underneath the corners of your washer to achieve a level height.

You May Like: How To Take Drain Out Of Sink

How To Replace The Pump

Buy a new one to match.

  • You can find a new pump by searching for your washing machines brand and model number online.
  • Pro tip: Model numbers are usually stamped on a small metal plate located under the tub lid or on the top, side or back of the machine. Copy down all the plate information and use it to access online parts suppliers, or take it along to the parts distributor.
  • Install the new pump. Attach it with screws and connect it to the washing machine hoses, then reinstall the belt.
  • Family Handyman

    Drain Pump Has Malfunctioned

    A washers drain pump expels water from the washtub into the drain hose, where it exits via a standpipe or sink. Sometimes, small pieces of clothing or debris can find their way to the pump and block its impellers. A washer wont spin out all the water if the pumps impellers arent working properly. You may also hear the pump operating more loudly than usual during the draining process.

    Consult your user manual to determine how to access the drain pump on your model washer. Once exposed, remove any visible blockages. If the pump is free of obstructions and still operates loudly while draining, it may be faulty and requires professional replacement.

    Don’t Miss: Drain Plug For Yeti Cooler

    What To Do First

    While your first instinct might be to try removing the laundry from the washer tub and bail the water out, this isnt a good first step for several reasons. Any laundry sitting in that water is soaking wet and will drip all over the place if removed. You might be tempted to grit your teeth and toss it in the dryer like that, but theres a reason your washing machine has a spin cycle to get rid of the excess water first. Bailing the water out is also messy and cumbersome.

    Its best to avoid trying to clear the machine of water and laundry before identifying or solving the problem. Yet, it might be the case that youll still end up having to do so in the end. Remember that many causes of an undrained washer can be fixed without disrupting the appliances contents.

    Washing Machine Isnt Level

    The Best Maytag Front Load Washer Won

    Whats one of the most common causes for a Samsung washer not draining? A machine thats not level will cause draining problems and can also be responsible when your washer wont spin properly. If a leveling tool reveals that your machine isnt level, first check the floor underneath the washer. Carpeting or a slippery surface can make the floor uneven or cause rocking.

    If the floor is level and the machine can still rock back and forth, check the washers leveling feet to make sure theyre even. Rotate the leveling feet counterclockwise to lower them and clockwise to raise them until theyre even.

    Don’t Miss: How To Install Linear Drain

    Lg Washer Wont Drain Heres What To Do

    If your LG washer isnt draining after you run a wash cycle, do not panic. While this is a frustrating problem, it can often be very simple to fix.

    Read on to find out what usually causes a washer to stop draining and find out what you can do to fix the problem.

    The following models of LG washer are covered by this guide:



    Clean Washer Drain Pump Filter

    If your front load Samsung washer wont drain, the drain pump filter may be clogged. In front-loading machines, this filter prevents small articles of clothing and debris from damaging the drain pump. However, if it gets clogged, the washer may not drain properly. Cleaning the filter on a monthly basis can help prevent blockages.

    Heres how to clean the drain pump filter when you find your front load Samsung washer not draining properly:

  • Open the pump filter access panel by pressing on the cover.
  • Position a towel and bowl under the drain hose cap to catch draining water.
  • Twist the drain hose cap counterclockwise to slowly remove it and drain the water.
  • After the water is drained, remove the filter and clean it with a soft toothbrush.
  • Inspect the filter housing and remove any visible dirt or debris.
  • Reinsert the filter, replace the cap, and turn it clockwise until its secure.
  • Close the access panel cover.
  • Do you still have washer draining problems even after these troubleshooting tips? A faulty door latch or Samsung drain pump problems may require a professional washing machine repair service. Call Appliance King of America to help with all your laundry appliance needs!

    Don’t Miss: How To Drain Clogged Dishwasher

    Clear Drain Tube Under Sink

    • Loosen the hose clamp on your drain tube where it connects to your garbage disposal or kitchen sink drain. Do this by turning it counter-clockwise with flat-head screwdriver.
    • Put the drain hose in a bucket and set your dishwasher to drain by pressing the drain/cancel/start button for three seconds. Then close the dishwasher door to start it.
    • While the drain tube is in the bucket, shake it to loosen the obstruction.
    • When water comes shooting out, let it continue until its fully drained. If the bucket fills up, open the dishwasher door to stop the drain.
    • Wiggle the drain hose back onto the garbage disposal unit or kitchen sink drain and tighten the hose clamp.

    Pro tip: If you just installed a new garbage disposal before the dishwasher drain problem occurred, the cause may be a plastic plug inside the tube that connects to the dishwasher drain. To remove this plug, put your flat-head screwdriver in the disposals drain tube pipe and hit the back of the screwdriver with a hammer. That will knock out the plastic plug.

    You May Like: Delta Shower Drain Champagne Bronze

    A Damaged Or Worn Belt

    GE Top Load Washer Won’t Drain

    If the drain pump is not damaged or clogged by the water still does not seem to be draining during the wash or rinse cycles.

    The problem could be a worn or damaged drive belt.

    This belt is what operates the pump and is located at the bottom of the washing machine.

    If you suspect the belt is the problem you need to contact the manufacturer to get a replacement drive belt.

    To replace the worn belt you will need to first unplug the washer and pull it away from the wall so that you can get to back access panel.

    Open the access panel and locate where the bottom of the tub is at and you will find the belt.

    Remove the old, worn-out belt and install the brand new belt. After it is in place, button everything back up and plug the washer in to see if the tub drains.

    Read Also: How To Clean Main Drain Line

    Samsung Washer Wont Drain Heres What To Do

    If your washer wont drain, you cant use it its that simple. There are many different reasons why your washer might not be draining, and fortunately, it can often be a very simple problem to fix.

    This guide will explain the most common reasons why your Samsung washer refuses to drain after a wash cycle and provide some simple solutions you can try to fix the problem.

    The following models of Samsung washer are covered by this guide:



    Samsung Dishwasher Not Draining Oc Code

    If you notice that your Samsung dishwasher is displaying an indicator code but it is not an LC code, you can breathe a bit easier knowing that there is no leak within your dishwasher. However, there are many other codes which indicate different messages that you should pay close attention to, especially if your dishwasher is not draining. If you have a Samsung dishwasher, it is not draining, and it is displaying an OC code, continue reading.

    If your Samsung dishwasher is not draining and is displaying an OC code, this is an indication that the water level is higher than it should be within the dishwasher. This indicates a drainage problem, which can be resolved by using previous troubleshooting methods.

    Recommended Reading: How To Bury Gutter Drains

    Draining A Front Loading Washer

    Many front loading machines house the drain in the bottom right-hand corner. This means you cant always fit a storage container neatly underneath the drain and you might end up with a lot of water on the floor.

    In that situation, you can use a very shallow tray. You could also ask somebody to help you position the machine on blocks of wood or bricks so that its slightly elevated. That way, you can place a bucket underneath the appliance.

    Blockage In Drain Hose

    My Top

    Some wash cycles are started to drain the water from the appliance drum. They are carried out using a water pump. The element sucks in excess liquid through the drain. If during washing you hear that the drain pump turns on, but the water remains in place, then it is worth checking the drain hose.

    Perhaps there was a blockage in it. Fixing this problem on your own is not difficult. First of all, you need to disconnect the washing machine from the power supply. Next, move it away from the wall, so you get unhindered access to the junction of the hose and the device. Remove the hose and take it from the sink.

    Now you can check it for the presence of foreign objects or debris that interferes with the smooth passage of water. Pour liquid into one end, and if it does not flow out of the other, then there is a blockage. Remove accumulated debris and connect the hose back to the machine.

    After that, run a test cycle and check if the washing machine is draining water.

    You May Like: How Much Do French Drains Cost

    Drain Your Washer Manually

    If you cant get the washer to drain using the steps above, you will have to manually drain the remaining wash water to complete the rest of the methods. The process is different for top-loading and front-loading models.

    For front-loaders:

  • Turn off the faucet supplying your washer.
  • Switch off the power at the wall, or unplug the washer.
  • Open the access panel. This is located on the front of your washer at the bottom left corner.
  • Place a shallow pan next to the access panel, and pull the drain hose out from its clip so that it will drain into the pan.
  • Take the plug out of the drain hose, and let it drain completely into the pan.
  • To manually drain a top-loader, you will need to use the washers main drain hose. Heres how to do it:

  • Turn off the faucet supplying your washer.
  • Switch off the power at the wall, or unplug the washer.
  • Pull your washer out from the wall so you can access the back.
  • Locate the gray drain hose connecting the washer to the drain pipe in the wall.
  • Place towels and a bucket underneath the point where the drain hose connects to the drain pipe.
  • Disconnect the drain hose from the drain pipe. If there is a clamp holding it in place, you may need to use pliers or a Phillips-head screwdriver to loosen this first.
  • Let the water flow into the bucket until all the water has drained.
  • Reconnect the drain hose, put your washer back in its place, and turn the water and power back on.

    Most Popular