Verify The Water Type
Ensure that the water is hard . Calcium and magnesium are present in soft water, which has an effect on the cleaning process.
Consider the following: If your water is excessively soft, it acts as a lubricant between the clothes and the washer drum. This causes the washer to wear out more quickly and spin less efficiently.
On the other hand, hard water contains fewer minerals and is therefore more effective at removing soil from clothing. Additionally, it assists in keeping your washer running longer and extends its life.
When To Call In A Professional
There are times to call in a professional to look at your washing machine. For instance, if your machine starts to smell like something is burning or repeatedly makes a new sound.
Other times to call a professional is when theres excess moisture showing up around your machine. This is a sign of leaking. Also, call a professional if your washing machine is showing intense wobbling or shaking and youre not able to fix the problem yourself.
You should also call in a professional if youre not confident in repairing your washing machine yourself as you could make the problem worse. Also, you will need a professional to repair a worn motor coupling, a bad clutch, or adjust a motor mounting plate.
Three: Empty The Washers Tub
If no water comes out of the drain hose into the bucket, your washers drain system could be the issue. You need to empty the tub so you can inspect things more closely. Use the wet-vac to get the water out of the machine. If there is a lot of water, use the bucket first to scoop out as much as you can.
Read Also: How To Clean Sink Drain Bathroom
Check For And Remove All Clogs In The Drain Hose
Once the water has fully drained out of the tub, check the drain hose for any debris, clothing, or soap blockages, all of which can make the washing machine drain clogged. To check for clogs, loosen the clamp connecting the hose to the bottom of the tub, then inspect the inside. If you see something blocking the hose or its connecting parts, remove it with the pliers, then reconnect the hose.
Wrong Whirlpool Wash Cycle Selected
Using the wrong setting for your particular load will leave clothes still wet after wash cycle ends. For example, the delicate or hand wash settings spin at slower speeds to protect more fragile fabrics. If these cycles are selected for a typical load of laundry, you may find the washing machine isnt spinning sufficiently, leaving clothes wet.
Always check your washer settings and clothing tags before starting your machine to ensure youve selected the right cycle for your laundry.
Recommended Reading: Baking Soda For Cleaning Drains
Whirlpool Duet Washer Washer Not Spinning Fast Enough
If you find your Whirlpool Duet washer not spinning fast enough, a DIY inspection can reveal the cause. Here are some easy fixes you can try at home to pinpoint the problem:
Broken lid switch: the lid switch prevents the washer from spinning if the lid is open. If the switch is malfunctioning, the lid wont close properly and your washer wont start. The switch can be tested with a multimeter to determine if its receiving power. If not, it should be replaced.
Obstructed drain hoses: when a washer doesnt spin sometimes a draining issue is to blame. Move your washer away from the wall and inspect the drain hose for kinks. Disconnect the hose and remove any visible clogs.
Loose belts or bolts: unplug the washer, unscrew the back panel and determine if the drive belt has loosened or suffered damage. Also, search for missing or loose bolts on the washer drum. Tighten any loose components and replace any that are broken or missing
Clogged water level switch and hose: remove your washers front panel to see if the clear water level hose is clogged with lint or debris. Remove any obstructions by blowing through the hose or tapping it on its side. The water level switch is at the other end of the tube at the back of the machine. It will need to be tested for continuity to determine if its functioning or needs to be replaced.
Examine The Water Pump
If your washing machine does not spin but continues to agitate, there is a good chance that the water pump is malfunctioning. The pump is responsible for extracting water from the drum and redistributing it throughout the wash.
The washing machine will not begin spinning until all of the water in the drum has been drained.
Pumps become clogged from time to time and frequently develop problems as they age.
If your washing machine makes an unusual noise or drains slowly, the problem may be with the pump. Unplug it and inspect it for blockages, such as lint or fabric softener sheets. If no visible signs of damage or clogging exist, it is necessary to replace the pump.
Also Check: 4 Inch Corrugated Drain Pipe Fittings
Ge Washing Machine Not Draining Or Spinning
The most common reasons your GE washer is not draining or spinning include: a clogged drain hose or drain pump filter, faulty door latch switch, clogged coin trap, or malfunctioned motor.
Dont worry. I will explain how to fix these issues and get your GE washer back to work. However, before you proceed, here are some words of caution:
If your GE washer is under warranty, I recommend contacting GE support and asking for advice. Unfortunately, opening your GE washer will void its warranty in most cases, so leave it as a last option.
How To Replace The Pump
Buy a new one to match.
- You can find a new pump by searching for your washing machine’s brand and model number online.
- Pro tip: Model numbers are usually stamped on a small metal plate located under the tub lid or on the top, side or back of the machine. Copy down all the plate information and use it to access online parts suppliers, or take it along to the parts distributor.
Read Also: Shower Drain Smells Like Urine
Defective Motor Control Board
If a washing machines motor control board fails, the washing machine may not function properly. In addition to reporting the problem to the brand and/or the agency responsible for product safety, a consumer can replace the control board with a new one after checking the model number. If a new part cannot be obtained, repairs can be made by experts or technicians who have been authorized by an authorized service team.
A control board is the electronic brain of your washing machine and provides power to the motor as well as cycles and water level. Control boards are relatively easy to replace, but there are a few working parts inside that can wear out over time. If your washing machine isnt working properly and you dont hear a humming sound when its on, the control board might be broken.
Verify The Spin Cycle Is Set To Extended Not Standard Or Quick
If it is not, you should make the necessary changes. The spin cycle has an effect on the efficiency with which your washer removes water and dirt from your clothes.
A longer spin cycle extracts more water and dirt from the system. As a result, your clothes will be cleaner. A shorter spin cycle, on the other hand, removes less water and dirt. This softens and fluffs the clothes, but may impart an odor.
If you use a fabric softener or an odor-fighting powder, you must use more of it or the clothes will retain their odor. Most people use the Standard spin cycle by default.
Recommended Reading: Standing Water In Shower Drain
One: Check For Electrical Issues
Assuming you have already checked your load to be sure its balanced, the next area you want to check is related to electrical levels. If there isnt enough power to run your washer, it will turn off in the middle of your cycle.
Washers require a high amount of power, so be sure that your outlet can handle it. Also, avoid placing surge protectors and extension cords back there. The more components electricity has to travel through, the less energy it will have at the end.
Test The Lid Switch Assembly
Top-loading washers will only drain and spin if the lid is securely closed. Therefore, a defective lid switch assembly could be causing the problem.
See if the machine responds when you depress the lid switch with your finger. If this triggers the drum to drain, you may simply need to extend the stem on the lid so it depresses the switch. If nothing happens when you press the lid switch, it may need to be replaced.
Recommended Reading: 72 Inch Shower Base Left Drain
Check The Drain Hose Or Pump For Clogs
Its common for a sock or other small piece of clothing to get into the drain system and clog the hose or pump. Remove the front panel of the washer and check for any obstructions in these areas. If you find anything, remove it to see if you can get the washing machine to drain.
Be aware that if you remove the hose to get an obstruction out of the pump, any water in the washer will come pouring out. To avoid a mess, scoop out as much water from the drum as possible before disconnecting the hose.
Track The Cycle Progress
Next, keep track of how your washer shifts through the cycles. Sometimes, you can learn a great deal just by listening to your washer and keeping track of when something goes wrong. For example, does your washer start spinning and then stop early? This could be a sign of a malfunction that triggers a safety mechanism. Does your washer fill but never agitate? This might be a problem with the control system or the belt. Does your washer spin, but the clothes are still soaking, this can mean that your belt is damaged or the system is not spinning enough.
Read Also: Washing Machine Drain Smells Like Sewage
Was A Gentle Or Delicate Cycle Or Low Spin Speed Selected
Gentle cycles, such as gentle, delicate, or handwash, use slow spins to keep fabrics from stretching and wrinkling. Slow spinning also leaves more water in the load. To remove more water, select a cycle that uses high spin speeds. A cycle or fabric selection such heavy duty or super has higher spin speeds and will leave less water in loads. Always follow your clothing care label to determine what cycle to use that is best for the garments being washed.
Look For The Clog And Pull It Out
The pump has a translucent housing, so you might even see the offending piece of clothing wrapped up in the pump.
- Loosen the clamp that holds the hose to the bottom of the tub and remove the hose.
- Pro tip: Have a bucket and sponge handy. Any water that’s left in the machine will run out.
Read Also: Dishwasher Not Draining Garbage Disposal
Motor Brushes Worn Out
Motor brushes in your washer are used to connect the drum to the motor. Brushes can become worn out over time, which means the machine will fill up with water and drain as normal, but the drum itself will be unable to spin and your clothes wont be cleaned effectively. New carbon brushes are inexpensive and are attached to the motor using a connecting wire. Seek professional help from an electrician!
There are a number other reasons why your machine may not be functioning correctly. Your machine may be faulty due to issues with the electrical controls, pumps, motors or other components of the machine. However, the aforementioned issues are the most common reasons why your machine may not be spinning.
Please do not attempt to repair electrical equipment without having adequate professional knowledge, training and experience. For professional advice and help, please contact our technicians.
Four: Check The Washers Drive Belt
Because you happen to be checking out the pump, this also gives you an excellent opportunity to check out the drive belt. The drive belt is connected nearby to the pump and will typically run it so that your washer may spin and drain adequately.
Typical signs that you need to replace the belt is apparent wear and tear from a visual inspection. Otherwise, your washer may go through an entire cycle, but your clothing will still be damp.
Don’t Miss: Dishwasher Drain Into Garbage Disposal
Samsung Washing Machine Won’t Spin Or Won’t Stop Spinning
Whether the washer tub is not spinning, kind of spinning, won’t stop spinning, has an unbalanced load error, or just runs way too long, the troubleshooting is the same. Usually, improper installation or balancing of the washer is to blame. This also applies for when clothes are coming out soaking wet or the wash cycle never ends at all. Load size and cycle type are the best places to start solving any of these problems.
Damaged Stator Or Rotor
When washers dont spin, its usually because of a problem with the rotor the part with blades that slings water from the tub. The rotor magnetizes the stator units and spins the tub. There could be a number of reasons for a faulty rotor, including worn-out magnets, loose or damaged parts, or a defective clutch.
Inspect the rotor for any cracks or dents if you notice any, replace it with a new, unblemished part. If the windings on the stator have defects, replace them. Test the machine again and repeat this step if the problem continues.
Don’t Miss: Cleaning Drains With Baking Soda Vinegar
The Power Source Is Inadequate
To spin and drain, washing machines need an adequate, consistent flow of power. If your washing machine is plugged directly into an outlet, this likely wont be a problem unless the circuit gets overloaded. Inadequate power is more likely to be an issue if the washer is plugged into a power strip or extension cord. If thats the case, rearrange things so that you are able to plug the washer into a wall outlet.
Check The Fabric Type
If youre using a powder-type detergent and adding the recommended amount, but your washing machine still wont spin, check the fabric type.
Different fabrics require varying amounts of detergent to be cleaned properly.
For instance, synthetic fabrics such as polyester and nylon require more detergent than natural fibers such as cotton or wool.
If youre unsure of the fabric youre using, bring some of your laundry to a laundromat or consult with friends or relatives who own sewing machines.
Recommended Reading: Drain Cleaner Vinegar Baking Soda
What If My Washers Drain Pump Is Clogged
If your washing machines drain pump is clogged, you will need to remove the panel leading to this. On front-loaded machines, you can find this below the door and in the front. Top-loaded washing machines have the drain pump near the back.
Remove the panel and check to see if there are any significant obstructions. You likely want gloves, and the gross wet buildup of fabric isnt always pleasant for some people to feel. If cleaning the pump doesnt work, there is a chance that you will need to make the replacement. Check your warranty to see if this is covered.
While it may be tempting to do this as a DIY project, it is incredibly complicated to replace. Get a quote from an HVAC technician, but this should not exceed $200 in most cases.
What Causes A Washing Machine To Not Spin Or Drain
Opening the washing machine lid or door after the end of the wash cycle and discovering your clothes are still submerged underwater can really dampen your spirits. Before you invest in a vintage hand-cranked laundry wringer to squeeze out that water, you should troubleshoot the likely causes of the washer failing to drain or spin . The solution to the problem can be quite simple, and the appliance replacement part you need can be relatively inexpensive and easy to install.
The reasons a washer will fail to drain, or spin, will differ depending on whether you own a top-load model or a front-load model. Lets examine how each washer type handles these two cycles
Also Check: Outdoor Shower Pan With Drain
Help My Washing Machine Will Only Spin Slowly
If your washing machine drum is rotating, but wont go into a fast spin cycle, the problem could be as simple as an unbalanced load.
Spinning a washing load fast, when it contains just one heavy piece of laundry, could damage the machine. It puts too much pressure on various parts connected to the drum, like the bearings and springs. To prevent damage, modern machines will spin more slowly if the load is unbalanced, stopping and starting the spin cycle to try and redistribute the clothes.
Avoiding this issue in future is simple. Wash multiple heavy items, like towels, jeans or thick jumpers, in the same wash wherever possible. Washing just one towel with a lot of lightweight items, like underwear or t-shirts, will make it hard for the machine to spread the weight of the load evenly around the drum. And when you put your clothes in the machine, make sure theyre not tangled and bunched up.
Unbalanced loads can also cause excessive noise during the spin cycle. Watch our video on How to Prevent a Washing Machine Spinning Noisily, to see for yourself the surprising difference an unbalanced load can make to your machine.