Defective Lid Switch Assembly
The switch assembly on a front load washer detects whether the lid is open, and the lock ensures that the lid stays shut when the washer is in use. The lid switch/lock assembly can succumb to electrical or mechanical failure. If the lid will not stay locked, the load will not spin and the washer will not drain.
Have a service technician inspect your washer to eliminate other potential problems that may cause the lid switch or lock to malfunction. Your technician may need to replace a faulty switch or lock assembly.
A front load washer is a major investment, and even the slightest fault can send you into a spin. However, proper use and maintenance can mitigate draining issues with your washer. At Capital City Appliance Service, Inc., we understand how important it is to have your washer working properly at all times. If you need service for your appliance, get in touch with us today.
Need Help with Your Broken Appliance?
Final Advice When Your Washing Machine Wont Drain
One of the best ways to keep your washer running well is to invest in an extended warranty or a home warranty. An extended warranty will cover repairs after your manufacturers warranty expires.
Likewise, a comprehensive plan from a top home warranty provider will also pay for repairs and even replace your washing machine when the time comes. For many homeowners, living without a washer and dryer is simply not possible.
Home warranty companies have networks of vetted technicians, so you do not have to worry about finding a trustworthy maintenance specialist. You simply call your provider, and they will schedule a service call.
You will be responsible for paying a service call fee, but after that, the company will pay for the remaining repair charges. After the repair is complete, most companies give you a 30 to 180-day reservice guarantee.
If the appliance breaks within the reservice period, you do not have to pay another deductible. These guarantees cover parts and labor, so you know you are not wasting money on repairs that do not fix the problem.
Plus, with an appliance warranty plan, you do not have to attempt DIY repairs and diagnostics. You can sit back and let a professional handle it for you.
Replacing A Damaged Pump
Recommended Reading: How To Change Sink Drain
Check That The Drain Pump Is Working
If there is nothing that is blocking the drainage system, the problem might be with the pump itself. Without the power of the pump, the drainage system cannot function.
Replacing the drain pump is a job best left to a professional appliance repair technician, but you can do some investigating to find out whether you need to hire one.
Check for the following signs of a faulty drain pump:
- There is no noise from the pump when you run a wash cycle.
- There is a noise, but it is a loud, unusual sucking or grinding sound.
- There is no problem draining the washer manually and no obstructions in the drain hose or filter.
- Remove the drain filter and use your fingers to turn the impeller. It should turn freely.
- There are broken pieces of plastic inside the drain filter.
Clean Washer Drain Pump Filter
If your front load Samsung washer wont drain, the drain pump filter may be clogged. In front-loading machines, this filter prevents small articles of clothing and debris from damaging the drain pump. However, if it gets clogged, the washer may not drain properly. Cleaning the filter on a monthly basis can help prevent blockages.
Heres how to clean the drain pump filter when you find your front load Samsung washer not draining properly:
Do you still have washer draining problems even after these troubleshooting tips? A faulty door latch or Samsung drain pump problems may require a professional washing machine repair service. Call Appliance King of America to help with all your laundry appliance needs!
Don’t Miss: Draining The Hot Water Heater
Three: Check The Pipe For Clogs Or Abnormal Bends
Lift the pipe and look through it to see if you cant find any apparent blockages. If you can see anything, you can try and push a long brush through there to remove the blockage.
After maneuvering the debris, it may be easier to move around with water. Try and put the garden house to it at first. If there is no sign of the clog letting loose, some drain cleaners are suited for rubber hoses. You may also try a drain snake.
Quick Answer: What Does It Mean When Your Washer Wont Drain
There are a few possibilities why your washing machine wont drain. Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed.
Don’t Miss: Does Washing Machine Drain Into Sewer Line
Run A Cycle With An Empty Machine And Stay Close
The first step to fixing standing water in the washing machine is to try and diagnose the problem. Run a cycle with no clothes in the washer, and stay close by so you can watch and listen to the machine . Can you hear the sound of water draining? Does the machine stop somewhere in the middle of a cycle? Does the spin cycle make loud noises? Pinpointing when the issue arises can help you find the problem faster.
Dishwasher Wont Drain 8 Steps To Fix It
One of the most common problems reported to plumbers by homeowners is when a dishwasher wont drain. While it can be scary to open the dishwasher door and see standing water at the bottom, it isnt always a plumbing emergency. In fact, you may be able to correct the problem yourself without professional help.
Broken Dishwasher? Need a Pro Now? Book a qualified, local home repair Pro with American Home Shield ProConnect in just a few clicks. . *Available in most major markets. Services vary by market.
Also Check: Basement Drain Backing Up In Winter
Why Is My Whirlpool Washer Not Draining Lets Fix It
Your washing machine will break down from time to time, and thats just a fact of life. It can be frustrating to run into issues with your Whirlpool washing machine when its in the middle of its cycle. Luckily, there are a few things you can check before calling a plumber out. This article will help you figure out why you are facing Whirlpool Washer not draining problem, using simple explanations for common causes of washing machine drainage problems.
Washing clothes without a care in the world is a luxury and one you shouldnt take for granted. Your washer should work as well as possible and should be easy to fix.
At the end of each cycle, its crucial for your Whirlpool washer to drain all of the water from its drum. This prevents clothes from being wet at the end of a wash cycle, which can cause them to mildew or smell bad. Here are the steps to take if youve noticed that your Whirlpool washer is leaving some water behind after its cycles.
Water In Washing Machine: Should I Replace My Washer
Your drain hose is perfectly fine, youve checked your load weight distribution, and you still have water trapped in the washing machine drum. Ugh! Is it time to shop for a new washing machine?
If your washer isnt working like it used to and its more than ten years old, that worn-out appliance is likely costing you unnecessary money in energy bills. If you cant remember when you last bought a new washing machine, youll fare better with a new, energy-efficient washing machine. New Whirlpool washer and dryer sets from Rent-A-Center offer an Ecoboost feature that can save you even more money by cutting down on energy consumptionsaving money, supporting the environment, AND getting your laundry done efficiently? Now, thats a winning combination!
Read Also: Drain Sticks Where To Buy
How Do You Fix A Whirlpool Washer When It Will Not Drain
What to Do When Your Washing Machine Wont Drain Perform a Master Reset. Unplug your washer for about one minute. Test the Lid Switch Assembly. See if the Drain Hose is Kinked. Check the Drain Hose or Pump for Clogs. Clean out the Coin Trap. Check the Water Level Control. Schedule Washing Machine Repair.
Check The Hose And Standpipe
If clearing the pump didnt help, you need to inspect the main drain hose and standpipe. You might want to wear rubber gloves and put a towel down.
Unplug the machine again and pull it forward if necessary to give you room round the back. Check the full length of the drain hose for any kinks or twists. If you dont see any, pull the hose from the standpipe and remove any obvious lumps of matter, then work along the hoses length, flexing it as much as possible to feel for any obvious blockages.
You may be able to break blockages up by flexing the hose, or by poking them with a straightened coat hanger.
Next, check the outside of the standpipe for water if its wet there might be a blockage in the drain itself. A powerful drain cleaner might help here, but be careful when pouring it in if the drain is fully blocked, corrosive chemicals may overflow the pipe.
In all cases, be careful when you replace the hose in the standpipe. Dont push it in too far, and make sure theres a gap around it to allow trapped air to escape. Leave any drain cleaner time to work, then repeat the drain test from step three.
If the washing machine drains, push it back into place, but check as you do so that the hose isnt becoming pinched. Use the provided u-shaped guide if necessary to prevent kinks near the standpipe.
Also Check: How To Clear Clogged Drain Pipe
Drain Manually If Needed
If you have deduced that the issue is most likely still a clog in the drain hose that you were unable to easily access, you will need to remove the drain hose from the machine to thoroughly inspect it.
Before doing this, however, you need to manually empty your machine. Otherwise, the water will spill out when you disconnect the hose. While an unpleasant process, the mess can be kept to a minimum if you make use of buckets and towels.
Removing Water From A Washer
After you have done your initial troubleshooting above, now is the time when you can give in to that impulse to drain your washer. To check for deeper clogs or other issues, you will need the washer free of water to avoid making a mess. Start by unplugging your washer if you have not already. If you have a shop vac that does wet work, you can use that to drain your washer.
Unfortunately, if you do not have access to a shop vac that allows for water suction, you will have to do it the old fashioned way, which is bailing out the water with a small bucket and soaking up whatever remains with a few towels.
Read Also: Cleaning Drains With Baking Soda Vinegar
How Do I Force My Whirlpool Washer To Drain
Find the Pause/Cancel button on the control panel. Press this button twice to drain the washer. Press the Power button and rotate the cycle selection knob to Drain and Spin to remove the remaining water from the load. Check the washers discharge hose if the water fails to drain from the washtub.
Remove The Hose To Check For Blockages
Still have water left in the washing machine after you check the hose for kinks? The drain hose could be obstructed somehow, which can mean that water is trapped in the washing machine drum or your washer drains slowly . Time for the next step: checking for blockages hidden inside the hose.
To do this, youll need to remove the hose entirely. Before you start, its a good idea to have a large bucket or container on hand to catch any water thats still in the hose . To remove your hose, use a flathead screwdriver to loosen the hose clamp on the back of the machine, then pull the hose away from the machine once the clamp is loose enough.
Hold the drain hose up to a light so that you can see all the way through it. If a sock or other foreign object is lodged inside, youve found the culprit of the standing water in your washing machine. A metal grabber, long stake, or similar-shaped object can help you push or pull the item out of the hose so you can reinstall it and get back to your laundry.
Read Also: Drain Plug For Yeti Cooler
Dirty Coin Trap Or Pump Filter
If your LG washer wont drain, its possible that the coin trap or pump filter is dirty.
To check and clean the coin trap: Unplug your washer and remove the drain hose from the back of the machine. Locate the coin trap on the front of the washer and remove it. Clean out any debris that may be blocking water drainage. Replace the coin trap and reattach the drain hose to your machine.
Pro-Tip: If you have a top-loading washer, the coin trap is located on the back of the machine.
To check and clean the pump filter: The pump filter is located under the washer tub. To access it, you will need to remove the washing machine tub. Unscrew the retaining nut and pull out the old pump filter. Clean out any debris that may be blocking water drainage. Replace the pump filter and screw on the retaining nut. Reattach your washing machine tub and continue troubleshooting your LG washer not draining issue.
Find A Qualified Washing Machine Repair Company
There are some washing machine fixes you probably should not attempt. For example, taking apart the control panel is a job that is better left to a professional.
Newer washing machines and front-load washing machines are more challenging to service yourself. There are numerous electrical components, and if you damage any of them, it will cause your machine not to operate properly.
You should also call an appliance service company if you are uncomfortable performing any DIY repairs because you can cause more damage if you are not sure of what you are doing.
If you are unsure, you should make an appointment with a technician. If your washing machine is under warranty, the manufacturer will take a look at it for free.
So, first, check to see if the unit is still under warranty. If it is not, you can find qualified local technicians on sites like Angieslist and Yelp.
Recommended Reading: How To Keep Drains Clear
Solution To Fix Ge Washer Wont Spin Issue
If your GE washing machine wont spin, then most likely it is due to a build-up of sud in the drum or an issue with its drain pump. If there is a large amount of sediments inside the washing machine, then you will need to remove them first by using a cleaning agent that will help dissolve those sediments and then refix it again.
Another possible causes of spinning problem can be broken belt or broken seal. But if you are sure that the problem isnt with your belt and seal, then check out whether there is any clog in the internal hose or something is wrong with coin mechanism or control panel of your GE washing machine.
If faucet is not fully opened, then this will also cause problems while spinning cycle. To avoid this, make sure that faucet is opened fully so there wont be any clog.
Also, check out whether the drain hose is connected properly to the washing machine. Sometimes, if it is not connected properly, then it will cause trouble while spinning a cycle.